JLG 600AJN Narrow – specifications
Series: JLG Boom Lift
With the 600AJN Narrow, JLG offers a model from the JLG Boom Lift series. The engine delivers 49.7 hp (36.5 kW). The unladen weight is 10,976.9 kg. The tank holds 113.9 litres. The fuel is diesel. The hydraulic tank holds 115.8 litres. The engine fitted is the D2011L04. Tyre size: 14x17,5. The JLG Boom Lift series covers 64 models. Rated output within it ranges from 6.8 to 88.4 hp; the 600AJN Narrow sits in the middle of that range with 49.7 hp. Its immediate neighbours are the 460SJ below it with 48.8 hp and the 600S 2WD above it with 65.3 hp. Unladen weight within it ranges from 5,681 to 26,354 kg; here the 600AJN Narrow sits in the lower part of that range with 10,976.9 kg. 180 JLG models across 10 series are on record.
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
JLG Boom Lift 400S to 740AJ (telescopic and articulating aerial work platforms) – S, SJ and AJ as boom type, a leading E for electric drive: engine output 5 to 65 kW, operating weight 3.5 to 26.4 t
On JLG models like the 400S, 460SJ or 740AJ, the number roughly tracks platform height in feet, while the letter code describes the boom type: "S" marks a straight telescopic boom, "SJ" a telescopic boom with an added basket jib, and "AJ" an articulating boom with a jib. JLG itself describes telescopic booms as reach specialists for distance and open ground, while articulating booms trade some reach for a more compact footprint around obstacles. As with other manufacturers, the quoted working height sits above bare platform height, since it factors in the reach of a standing operator on the platform; actual platform height is correspondingly lower than the model number suggests.
Read on 4 more paragraphs
Models with a leading "E", such as the E26MJ, E33MJ or E600J, mark electric-drive lifts — as opposed to diesel- or gas-powered models like the 400S or 460SJ.
Platform capacity holds steady at 230 kg across the recorded SpecCodex data, matching comparable lifts from other manufacturers. Several models also share a recorded displacement of 2,900 cm³, pointing to one common engine fitted across multiple boom sizes.
When buying used, check for play in the telescoping boom's slide pads, inspect hydraulic hoses running through the boom, test the emergency-lowering system, and — on electric models — check battery condition. Hours on the clock and the service log deserve a look too.
In short: the number is a rough platform height, S/SJ/AJ describes the boom type, and a leading E marks electric drive.
Sources: SpecCodex register, model data: JLG Boom Lift, — JLG: Straight vs. Articulating Boom Lift, — JLG: 800S Telescopic Boom Lift Produktseite
Technical data
Engine
| Engine model | D2011L04correct |
|---|---|
| Fuel | dieselcorrect |
| Power | 49.7 hp (36.5 kW)correct |
Dimensions and weights
| Length | 8,839.2 mmcorrect |
|---|---|
| Width | 2,133.6 mmcorrect |
| Unladen weight | 10,976.9 kgcorrect |
Drivetrain and chassis
| Tyre size | 14x17.5correct |
|---|---|
| Turning radius | 3,410 mmcorrect |
Working data
| Hydraulic oil capacity | 115.8 lcorrect |
|---|---|
| Fuel tank capacity | 113.9 lcorrect |
Frequently asked questions
More machines with this engine (D2011L04, 7)
Where this model stands
Power-to-weight ratio: 3.3 kW/t (36 kW / 11 t)
Stronger than 53% of the aerial work platforms in the register — out of 205 models with a stated power figure.
Calculated from the documented figures above — not a rating.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Telescopic platform in 3D section
Turn the model, look inside and click an assembly — each one is explained.