Technical register for agricultural, construction and commercial machinery · sourced data
Start › Aerial work platforms › JLG › JLG Boom Lift › 600A 2WD

JLG 600A 2WD

Series: JLG Boom Lift

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The JLG 600A 2WD is a model in the JLG Boom Lift series. The engine delivers 49.7 hp (36.5 kW). The machine is 8,050 mm long. The unladen weight is 10,047 kg. The wheelbase measures 2,441.4 mm. Ground clearance is 200.2 mm. Top speed is 6.9 km/h. The tank holds 113.9 litres. The fuel is diesel. The hydraulic tank holds 115.8 litres. The engine fitted is the D2011L04. Tyre size: 14x17,5. The JLG Boom Lift series covers 64 models. Rated output within it ranges from 6.8 to 88.4 hp; the 600A 2WD sits in the middle of that range with 49.7 hp. Its immediate neighbours are the 460SJ below it with 48.8 hp and the 600S 2WD above it with 65.3 hp. Unladen weight within it ranges from 5,681 to 26,354 kg; here the 600A 2WD sits in the lower part of that range with 10,047 kg. 180 JLG models across 10 series are on record.

JLG Boom Lift 400S to 740AJ (telescopic and articulating aerial work platforms) – S, SJ and AJ as boom type, a leading E for electric drive: engine output 5 to 65 kW, operating weight 3.5 to 26.4 t

On JLG models like the 400S, 460SJ or 740AJ, the number roughly tracks platform height in feet, while the letter code describes the boom type: "S" marks a straight telescopic boom, "SJ" a telescopic boom with an added basket jib, and "AJ" an articulating boom with a jib. JLG itself describes telescopic booms as reach specialists for distance and open ground, while articulating booms trade some reach for a more compact footprint around obstacles. As with other manufacturers, the quoted working height sits above bare platform height, since it factors in the reach of a standing operator on the platform; actual platform height is correspondingly lower than the model number suggests.

Read on 4 more paragraphs

Models with a leading "E", such as the E26MJ, E33MJ or E600J, mark electric-drive lifts — as opposed to diesel- or gas-powered models like the 400S or 460SJ.

Platform capacity holds steady at 230 kg across the recorded SpecCodex data, matching comparable lifts from other manufacturers. Several models also share a recorded displacement of 2,900 cm³, pointing to one common engine fitted across multiple boom sizes.

When buying used, check for play in the telescoping boom's slide pads, inspect hydraulic hoses running through the boom, test the emergency-lowering system, and — on electric models — check battery condition. Hours on the clock and the service log deserve a look too.

In short: the number is a rough platform height, S/SJ/AJ describes the boom type, and a leading E marks electric drive.

Sources: SpecCodex register, model data: JLG Boom Lift, — JLG: Straight vs. Articulating Boom Lift, — JLG: 800S Telescopic Boom Lift Produktseite

Technical data

Engine

Engine modelD2011L04correct
Fueldieselcorrect
Power49.7 hp (36.5 kW)correct

Dimensions and weights

Length8,050 mmcorrect
Width2,441.4 mmcorrect
Wheelbase2,441.4 mmcorrect
Ground clearance200.2 mmcorrect
Unladen weight10,047 kgcorrect

Drivetrain and chassis

Tyre size14x17.5correct
Top speed6.9 km/hcorrect
Turning radius5,380 mmcorrect

Working data

Hydraulic oil capacity115.8 lcorrect
Fuel tank capacity113.9 lcorrect

More machines with this engine (D2011L04, 7)

Where this model stands

Power-to-weight ratio: 3.6 kW/t (36 kW / 10 t)

Stronger than 53% of the aerial work platforms in the register — out of 205 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the JLG 600A 2WD have?

The JLG 600A 2WD delivers 49.7 hp.

How much does the JLG 600A 2WD weigh?

The unladen weight is 10,047 kg.

How fast does the JLG 600A 2WD go?

Top speed is 6.9 km/h.

What are the dimensions of the JLG 600A 2WD?

8,050 mm × 2,441 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Telescopic platform in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare