Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Jinma › 350 A

Jinma 350 A

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Jinma 350 A is a machine built by Jinma. The engine delivers 35 hp (25.7 kW). The engine is water-cooled. The model was built in China. The engine fitted is the TY3100/4L22T. The gearbox offers 8 forward gears. There are also 2 reverse gears. The linkage is category I. The PTO runs at 540/720 or 540/1000 rpm. Rated output across the Jinma range ranges from 16 to 125 hp; the 350 A sits in the lower part of that range with 35 hp. Its immediate neighbours are the 304XR below it with 30 hp and the 404A above it with 40 hp. Rated output across the Jinma range ranges from 11.8 to 92 kW; here the 350 A sits in the lower part of that range with 25.7 kW. 75 Jinma models across 3 series are on record.

Jinma – other models: the collective page of tractors outside the named ranges, from the two- to six-cylinder 164 to 954 types to the Orchard version, 12 to 92 kW, Chinese TY and KM diesel engine families

This page gathers the Jinma tractors the register could not assign to a named range. Jinma Industrial Group, based in Luoyang in China's Henan province, is one of the older Chinese tractor makers and exports its models mainly to Africa, South and Central America and Eastern Europe. The type designations mostly track the power class in hp: the 254 denotes about 25 hp, the 354 about 35 hp, the 454 about 45 hp, up to the 954 with about 95 hp; the suffixes A, B and E denote equipment variants, LE the reduced-emission version and Orchard the narrow build for fruit and wine growing. The engines come from several Chinese makers, recognisable by the TY and KM type families.

Read on 3 more paragraphs

The register lists here 71 versions with 11.8 to 92 kW (16 to 125 hp) from two- to six-cylinders of 1,532 to 3,456 cm³, lengths from 3,185 to 4,054 mm and widths from 1,400 to 1,785 mm.

Jinma serves mainly the lower and mid power segment and, in its export markets, is a low-cost alternative to the established Western and Japanese brands.

On used tractors, engine condition and fuel quality count, along with clutch and transmission, hydraulics and PTO, and on the Orchard version the condition of the cab and mudguard panelling; spare parts are usually only available through specialist importers rather than a nationwide factory network.

Sources: SpecCodex register, model data: Jinma (weitere Modelle)

Technical data

Engine

Engine modelTY3100/4L22Tcorrect
Power35 hp (25.7 kW)correct
Rated speed2300/2350 rpmcorrect
Cylinders3/4correct
Displacement2.47/2.156correct
Bore100mm/85mmcorrect
Stroke105mm/95mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Wheelbase1,776.5 mmcorrect

Drivetrain and chassis

Driverear-wheel driveWDcorrect
Forward gears8correct
Reverse gears2correct

Working data

Lifting capacity5,800correct

Origin and approval

PlantChinacorrect

Other data

Linkage categoryCat Icorrect
PTO speed540/720 or 540/1000correct

Frequently asked questions

How much power does the Jinma 350 A have?

The Jinma 350 A delivers 35 hp.

What engine does the Jinma 350 A have?

3/4 cylinders.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare