Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Jinma › 164Y

Jinma 164Y

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 164Y comes from Jinma. The engine delivers 16 hp (11.8 kW), has 3 cylinders. Rated speed is 2,300 rpm. The engine is water-cooled. The engine fitted is the 3M78. The gearbox offers 6 forward gears. There are also 2 reverse gears. The linkage is category 0. The PTO runs at 540/720/1000 rpm. Rated output across the Jinma range ranges from 16 to 125 hp; the 164Y sits at the bottom of that range with 16 hp. Its immediate neighbours are the 184 above it with 18 hp. Rated output across the Jinma range ranges from 11.8 to 92 kW; here the 164Y sits at the bottom of that range with 11.8 kW. 75 Jinma models across 3 series are on record.

Jinma – other models: the collective page of tractors outside the named ranges, from the two- to six-cylinder 164 to 954 types to the Orchard version, 12 to 92 kW, Chinese TY and KM diesel engine families

This page gathers the Jinma tractors the register could not assign to a named range. Jinma Industrial Group, based in Luoyang in China's Henan province, is one of the older Chinese tractor makers and exports its models mainly to Africa, South and Central America and Eastern Europe. The type designations mostly track the power class in hp: the 254 denotes about 25 hp, the 354 about 35 hp, the 454 about 45 hp, up to the 954 with about 95 hp; the suffixes A, B and E denote equipment variants, LE the reduced-emission version and Orchard the narrow build for fruit and wine growing. The engines come from several Chinese makers, recognisable by the TY and KM type families.

Read on 3 more paragraphs

The register lists here 71 versions with 11.8 to 92 kW (16 to 125 hp) from two- to six-cylinders of 1,532 to 3,456 cm³, lengths from 3,185 to 4,054 mm and widths from 1,400 to 1,785 mm.

Jinma serves mainly the lower and mid power segment and, in its export markets, is a low-cost alternative to the established Western and Japanese brands.

On used tractors, engine condition and fuel quality count, along with clutch and transmission, hydraulics and PTO, and on the Orchard version the condition of the cab and mudguard panelling; spare parts are usually only available through specialist importers rather than a nationwide factory network.

Sources: Kennwerte der Modelle Jinma (weitere Modelle)

Technical data

Engine

Engine model3M78correct
Power16 hp (11.8 kW)correct
Rated speed2,300 rpmcorrect
Cylinders3correct
Displacement1,028correct
Bore75 mmcorrect
Stroke77.6 mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Wheelbase1,280 mmcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect
Forward gears6correct
Reverse gears2correct
ClutchSingle Stagecorrect

Working data

Lifting capacity2,280correct

Other data

Linkage categoryCat 0correct
PTO speed540/720/1000correct

Frequently asked questions

How much power does the Jinma 164Y have?

The Jinma 164Y delivers 16 hp.

What engine does the Jinma 164Y have?

3 cylinders.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare