Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Iveco › AD190S/FP-D

Iveco AD190S/FP-D

Built: 2013-2016 · Series: AD190S

More machines from model year 2013

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Iveco AD190S/FP-D belongs to the AD190S series. Production: 2013-2016. The engine delivers 228 kW, has 6 cylinders, with a displacement of 8,710 cm³. The machine is 6,900 mm long and 2,500 mm wide. The unladen weight is 8,700 kg. The gross vehicle weight is 20,000 kg. The AD190S series covers 7 models. Rated output within it ranges from 228 to 294 kW; the AD190S/FP-D sits at the bottom of that range with 228 kW. Its immediate neighbours are the AD190S/FP above it with 251 kW. Unladen weight within it ranges from 8,314 to 14,145 kg; here the AD190S/FP-D sits at the bottom of that range with 8,700 kg. 3135 Iveco models across 106 series are on record.

Iveco AD190S – the 19-tonner with day cab: AD for Active Day, 190 for the 19-tonne gross weight class, six-cylinders of 8.3 to 11.1 litres, also offered as a natural-gas version for distribution traffic

Iveco was formed in 1975 from the merger of the commercial-vehicle divisions of Fiat, OM and Lancia with the French maker Unic and the German Magirus-Deutz into the Industrial Vehicles Corporation, based in Turin. The AD190S range belongs to the Stralis/Trakker family with its three cab lines: AD stands for Active Day, the low day cab without a bunk, AT for Active Time with one bunk and AS for Active Space as the large flat-floor long-haul cab. The number 190 in the type designation gives the gross weight class of around 19 tonnes, the letter S the corresponding chassis version. Alongside diesel engines, the register also lists natural-gas variants (CNG), which Iveco offered early on for inner-city distribution traffic and refuse vehicles, where the day cab suffices because the vehicles return to the depot daily.

Read on 3 more paragraphs

The register lists here 7 versions with outputs of 228 to 294 kW, six-cylinders of 8,250 to 11,120 cm³, unladen weights of 8,314 to 14,145 kg, a gross vehicle weight of 19,500 to 20,500 kg, lengths of 6,300 to 10,850 mm and widths of 2,500 to 2,600 mm.

The AD190S served as a distribution truck with day cab for municipalities, waste operators and regional haulage, where the daily return to depot makes a sleeper cab unnecessary and the compact cab eases access to narrow streets and yards.

On a used example, rust on the frame, cab mounts and body bolted connections, the condition of clutch and gearbox under daily stop-and-go operation, on the CNG versions also the tanks and their inspection intervals, and brakes and suspension all count; parts run through the Iveco service network.

Sources: SpecCodex register, model data: Iveco AD190S, Iveco (manufacturer)

Technical data

Engine

Power228 kWcorrect
Cylinders6correct
Displacement8,710 cm³correct

Dimensions and weights

Length6,900 mmcorrect
Width2,500 mmcorrect
Unladen weight8,700 kgcorrect
Gross vehicle weight20,000 kgcorrect

Where this model stands

Power-to-weight ratio: 26.2 kW/t (228 kW / 8.7 t)

Stronger than 35% of the trucks in the register — out of 25,241 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Iveco AD190S/FP-D have?

The Iveco AD190S/FP-D delivers 228 kW.

How much does the Iveco AD190S/FP-D weigh?

The unladen weight is 8,700 kg.

What is the gross vehicle weight of the Iveco AD190S/FP-D?

20,000 kg.

What engine does the Iveco AD190S/FP-D have?

6 cylinders, 8,710 cm³ displacement.

What are the dimensions of the Iveco AD190S/FP-D?

6,900 mm × 2,500 mm.

When was the Iveco AD190S/FP-D built?

Production years: 2013-2016.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare