Iveco/kegger DAILY/KEGGE
Built: 2024 · Series: Other models
More machines from model year 2024
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Iveco/Kegger – other models: a registry entry of Iveco Daily chassis in the 3.5-tonne class, 2,085 to 2,800 kg kerb weight, 6,700 to 7,480 mm length, 3.0-litre four-cylinder engine
This page gathers the Iveco vehicles listed under the Kegger designation that the register could not assign to a named range. The model entry DAILY/KEGGE shows the base directly: these are Iveco Daily chassis, alongside the types 35S12 and 35S18; the gross weight of 3,500 kg recorded throughout matches the 35 class named in the type code, the most widely registered weight class among light Iveco Daily chassis in Europe.
Read on 4 more paragraphs
The register lists 3 versions here with kerb weights from 2,085 to 2,800 kg at a gross weight of 3,500 kg, four-cylinder engines of 2,998 cm³, lengths from 6,700 to 7,480 mm and widths from 2,060 to 2,200 mm.
A spread of over 700 kg in kerb weight at comparable displacement shows bodies of varying weight on the same Daily chassis, from light box bodies to heavier special bodies; payload consequently ranges from around 700 to over 1,400 kg, a range wide enough to cover both van-type deliveries and heavier special-purpose loads.
The Iveco Daily's ladder-frame chassis, which sets it apart from the mostly unitary-bodied competitors in its class, lets bodybuilders such as Kegger fit bodies of varying weight onto the same chassis without having to design the body itself as a load-bearing element.
On used vehicles of this class, check rust on the frame and wheel arches, the condition of the clutch and turbocharger, and how the respective body connects to the Daily chassis; drivetrain parts come through the independent parts network for Iveco commercial vehicles.
Sources: SpecCodex register, model data: Iveco/Kegger
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,998 cm³correct |
Dimensions and weights
| Length | 6,700 mmcorrect |
|---|---|
| Width | 2,200 mmcorrect |
| Wheelbase | 4,100 mmcorrect |
| Unladen weight | 2,800 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 160 km/hcorrect |
Frequently asked questions
How much does the Iveco/kegger DAILY/KEGGE weigh?
The unladen weight is 2,800 kg.
What is the gross vehicle weight of the Iveco/kegger DAILY/KEGGE?
3,500 kg.
What engine does the Iveco/kegger DAILY/KEGGE have?
4 cylinders, 2,998 cm³ displacement.
What are the dimensions of the Iveco/kegger DAILY/KEGGE?
6,700 mm × 2,200 mm.
When was the Iveco/kegger DAILY/KEGGE built?
Production years: 2024.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
