Technical register for agricultural, construction and commercial machinery · sourced data

Ingersoll Rand 8L

Series: Ingersoll Rand Telescopic Forklift

The Ingersoll Rand 8L is a model in the Ingersoll Rand Telescopic Forklift series. The engine delivers 85.8 kW. The machine is 2,400 mm high. The unladen weight is 11,112 kg. The wheelbase measures 3,301 mm. The tank holds 113.6 litres. The gearbox has 4 forward gears. There are also 4 reverse gears. The hydraulic tank holds 170.3 litres. Lift height is 12,500 mm. The engine fitted is the e. The Ingersoll Rand Telescopic Forklift series covers 9 models. Rated output within it ranges from 73.8 to 85.8 kW; the 8L sits at the top of that range with 85.8 kW. Its immediate neighbours are the VR843C below it with 82 kW. Unladen weight within it ranges from 2,273 to 14,300.9 kg; here the 8L sits in the upper part of that range with 11,112 kg. 360 Ingersoll Rand models across 16 series are on record.

Ingersoll-Rand telehandlers VR518 to VR1056C – the American capacity-and-height logic: VR for Vertical Reach, the first digits as capacity in thousand pounds, the last as lift height in feet, C as generation

In the 1990s and 2000s Ingersoll-Rand ran, alongside rollers, compressors and Bobcat compact loaders, telehandlers for North American building construction – the VR range, which lifts pallets, roof trusses and masonry to storey height on sites. The type logic is the American convention of the class: VR stands for Vertical Reach, the first digits give the capacity in thousand pounds, the last the lift height in feet – a VR518 lifts 5,000 lb to 18 ft, a VR642 6,000 lb to 42 ft, a VR1056 10,000 lb to 56 ft – C marks the generation; the 8L is an older model with a different logic. The engines are Cummins QSB4.5 of 4.5 litres and Perkins 1004 and 1104 of 4.0 and 4.4 litres, mounted transversely in the frame as the layout with the driver seated beside the boom requires.

Read on 3 more paragraphs

The register lists 9 versions with 73.8 to 85.8 kW, heights from 2,110 to 2,480 mm and service weights up to 14,301 kg on the largest model.

With the sale of the construction divisions – Bobcat and compact equipment to Doosan in 2007, road machinery to Volvo – the Ingersoll-Rand programme ended; the VR telehandlers were continued from 2007 under the Doosan name and then Bobcat. In Europe they are rare.

On used machines, operating hours, the condition of boom, wear pads and telescope chains, leak-free cylinders, load-moment limiter, axles and tyres and parts supply, which runs through Cummins and Perkins for the engines, are what count.

Sources: SpecCodex register, model data: Ingersoll-Rand Teleskoplader, Volvo CE Geschichte (Ingersoll-Rand Road Machinery)

Technical data

Engine

Engine modelecorrect
Power85.8 kWcorrect
Aspirationturbo dieselcorrect

Dimensions and weights

Height2,400 mmcorrect
Wheelbase3,301 mmcorrect
Unladen weight11,112 kgcorrect

Drivetrain and chassis

Gearbox type4-speed power shfitcorrect
Forward gears4correct
Reverse gears4correct

Working data

Lift height12,500 mmcorrect
Hydraulic oil capacity170.3 lcorrect
Fuel tank capacity113.6 lcorrect

More machines with this engine (e, 3)

Where this model stands

Power-to-weight ratio: 7.7 kW/t (86 kW / 11.1 t)

Stronger than 67% of the telehandlers in the register — out of 661 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Ingersoll Rand 8L have?

The Ingersoll Rand 8L delivers 85.8 kW.

How much does the Ingersoll Rand 8L weigh?

The unladen weight is 11,112 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Telehandler in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare