Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Hvm › KR-Master horsebox

Hvm KR-Master horsebox

Built: 2017-2019 · Series: Other models

More machines from model year 2017

The photo shows the FORD BOX from the same series. Source: https://www.truck1.eu/leasing/vans/small-vans/ford/diesel/ai

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Hvm KR-Master horsebox is a machine built by Hvm. Production: 2017-2019. The engine delivers 110 kW, has 4 cylinders, with a displacement of 2,299 cm³. The machine is 6,530 mm long and 2,100 mm wide. The unladen weight is 2,600 kg. The wheelbase measures 4,330 mm. Top speed is 138 km/h. The gross vehicle weight is 3,500 kg. The machine runs on 4 wheels. Rated output across the Hvm range ranges from 110 to 132 kW; the KR-Master horsebox sits at the bottom of that range with 110 kW. Its immediate neighbours are the KR-Y4 Box above it with 121 kW. Unladen weight across the Hvm range ranges from 2,600 to 2,810 kg; here the KR-Master horsebox sits at the bottom of that range with 2,600 kg. 13 Hvm models across 2 series are on record.

Hvm – other models: the collective page for horsebox bodies on van chassis outside the named series, based on the Renault Master, Opel Movano, Ford Transit and MAN TGE, 110 to 132 kW, 3.5 tonnes gross vehicle weight

This page gathers horsebox bodies that the register lists under the name Hvm and does not assign to a named series. Model designations such as HVM MASTER HORSEBOX, KR-MOVANO HORSEBOX and MASTER HORSEBOX show that the bodies are built on the chassis of established van ranges: the Renault Master, Opel/Vauxhall Movano, Ford Transit and MAN TGE. The term horsebox denotes a specially fitted horse transporter with partitions, tying points and a non-slip floor in the load area.

Read on 3 more paragraphs

The register lists 10 versions with 1,968 to 2,299 cm³ engine capacity from four-cylinder engines, 2,600 to 2,760 kg kerb weight and 3,500 kg gross vehicle weight. Lengths range from 6,180 to 6,890 mm, width stands uniformly at 2,100 mm; measured outputs lie between 110 and 132 kW.

Horseboxes on a 3.5-tonne base can be driven on a standard car licence and are therefore common at riding stables, with competition riders and in commercial horse transport. The consistent use of the full 3.5-tonne gross vehicle weight shows that the bodies fully exploit the payload limit of that licence category.

For a used example, the condition and ventilation of the horse compartment, the load-bearing capacity and anchoring of the partitions, and the braking system and tyres matter greatly given the often fully used payload. Corrosion on the body underside and around the ramp area should be checked; the base vehicles themselves benefit from the dense service network of the respective car manufacturers.

Sources: SpecCodex register, model data: Hvm (weitere Modelle)

Technical data

Engine

Power110 kWcorrect
Cylinders4correct
Displacement2,299 cm³correct

Dimensions and weights

Length6,530 mmcorrect
Width2,100 mmcorrect
Wheelbase4,330 mmcorrect
Unladen weight2,600 kgcorrect
Gross vehicle weight3,500 kgcorrect

Drivetrain and chassis

Wheels4correct
Top speed138 km/hcorrect

Where this model stands

Power-to-weight ratio: 42.3 kW/t (110 kW / 2.6 t)

Stronger than 75% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Hvm KR-Master horsebox have?

The Hvm KR-Master horsebox delivers 110 kW.

How much does the Hvm KR-Master horsebox weigh?

The unladen weight is 2,600 kg.

What is the gross vehicle weight of the Hvm KR-Master horsebox?

3,500 kg.

What engine does the Hvm KR-Master horsebox have?

4 cylinders, 2,299 cm³ displacement.

How fast does the Hvm KR-Master horsebox go?

Top speed is 138 km/h.

What are the dimensions of the Hvm KR-Master horsebox?

6,530 mm × 2,100 mm.

When was the Hvm KR-Master horsebox built?

Production years: 2017-2019.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare