Technical register for agricultural, construction and commercial machinery · sourced data

Hitachi ZX490LCH-6

Series: Hitachi Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Hitachi ZX490LCH-6 belongs to the Hitachi Hydraulic Excavator series. The engine delivers 367.1 hp (270 kW), has 6 cylinders, with a displacement of 9,840.4 cm³. The engine comes from Isuzu. Rated speed is 2,000 rpm. The unladen weight is 49,400 kg. Ground clearance is 737.6 mm. The tank holds 675.3 litres. The pump delivers 800.2 l/min. The hydraulic tank holds 510.3 litres. The cooling system holds 62.1 litres. The oil fill is 41.3 litres. The electrical system runs on 24 V. The engine fitted is the AQ-6UZ1X. The Hitachi Hydraulic Excavator series covers 158 models. Rated output within it ranges from 105.4 to 693.5 hp; the ZX490LCH-6 sits in the middle of that range with 367.1 hp. Its immediate neighbours are the EX300LCH-2 below it with 220.3 hp and the EX700 above it with 440.5 hp. Unladen weight within it ranges from 12,100 to 108,000 kg; here the ZX490LCH-6 sits in the lower part of that range with 49,400 kg. 357 Hitachi models across 24 series are on record.

Hitachi ZX – what the number and letters reveal about weight class, LC/US/W undercarriage variants and the adjustable boom option across the ZAXIS range

Hitachi codes usually start with ZX, short for the ZAXIS line. The following number places the model in an approximate operating-weight class, letters such as LC, US or W describe the undercarriage and configuration, and a dash number at the end marks the generation.

Read on 5 more paragraphs

LC marks a widened undercarriage for extra stability, US denotes ultra-short-tail models with a compact rear overhang for tight jobsites, and W marks wheeled machines. Current models run as ZAXIS-7, while older stock is still labelled -3, -5 or -6.

Alongside these sits the older EX line, such as the EX700: mechanically simpler than the ZX models, with less electronics, but built rugged for heavy continuous duty.

Alongside the one-piece monoboom, many ZX models offer a two-piece adjustable boom whose knuckle can swing sideways; this allows digging along walls or pipelines without having to square the machine itself up to them, though at somewhat lower breakout force than the rigid monoboom.

The collective entry spans small excavators from around 42 kW up to large machines above 480 kW. When buying used, check the hour meter along with the slew ring, boom-and-bucket linkage bushings and any leaks at the hydraulic cylinders.

In short: ZX plus size number plus undercarriage letter plus generation digit make up the full code, as seen on models like ZX120, ZX200 or ZX330.

Sources: SpecCodex register, model data: Hitachi Hydraulic Excavator

Technical data

Engine

Engine makeIsuzucorrect
Engine modelAQ-6UZ1Xcorrect
Power367.1 hp (270 kW)correct
Rated speed2,000 rpmcorrect
Cylinders6correct
Displacement9,840.4 cm³correct
Coolant capacity62.1 lcorrect
Engine oil capacity41.3 lcorrect

Dimensions and weights

Ground clearance737.6 mmcorrect
Unladen weight49,400 kgcorrect

Working data

Pump flow800.2 l/mincorrect
Hydraulic oil capacity510.3 lcorrect
Fuel tank capacity675.3 lcorrect

Other data

Cab height3,331.5 mmcorrect
System voltage24 Vcorrect

Where this model stands

Power-to-weight ratio: 5.5 kW/t (270 kW / 49.4 t)

Stronger than 90% of the excavators & compaction in the register — out of 1,650 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Hitachi ZX490LCH-6 have?

The Hitachi ZX490LCH-6 delivers 367 hp.

How much does the Hitachi ZX490LCH-6 weigh?

The unladen weight is 49,400 kg.

What engine does the Hitachi ZX490LCH-6 have?

6 cylinders, 9,840 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare