Technical register for agricultural, construction and commercial machinery · sourced data

Hitachi EX1100

Series: Hitachi Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Hitachi EX1100 is a model in the Hitachi Hydraulic Excavator series. The engine delivers 590.2 hp (470 kW), has 6 cylinders. The engine comes from Cummins. Ground clearance is 1,051.6 mm. The tank holds 1,200.4 litres. The pump delivers 490.2 l/min. The engine fitted is the KTTA19-C. The Hitachi Hydraulic Excavator series covers 158 models. Rated output within it ranges from 105.4 to 693.5 hp; the EX1100 sits in the upper part of that range with 590.2 hp. Its immediate neighbours are the EX700 below it with 440.5 hp and the EX1200-5C above it with 693.5 hp. 357 Hitachi models across 24 series are on record. The model is listed under Excavators & compaction. 11 verified figures from 1 source are on file.

Hitachi ZX — what the number and letters reveal about weight class

Hitachi codes usually start with ZX, short for the ZAXIS line. The following number places the model in an approximate operating-weight class, letters such as LC, US or W describe the undercarriage and configuration, and a dash number at the end marks the generation.

Read on 4 more paragraphs

LC marks a widened undercarriage for extra stability, US denotes ultra-short-tail models with a compact rear overhang for tight jobsites, and W marks wheeled machines. Current models run as ZAXIS-7, while older stock is still labelled -3, -5 or -6.

Alongside these sits the older EX line, such as the EX700: mechanically simpler than the ZX models, with less electronics, but built rugged for heavy continuous duty.

The collective entry spans small excavators from around 42 kW up to large machines above 480 kW. When buying used, check the hour meter along with the slew ring, boom-and-bucket linkage bushings and any leaks at the hydraulic cylinders.

In short: ZX plus size number plus undercarriage letter plus generation digit make up the full code, as seen on models like ZX120, ZX200 or ZX330.

Sources: Kennwerte der Modelle Hitachi Hydraulic Excavator, ZAXIS-7 Modellcode-Erklaerung, Hitachi Herstellerbroschuere, ZAXIS-7 Grossbagger-Broschuere, Hitachi

Technical data

Engine

Engine makeCumminscorrect
Engine modelKTTA19-Ccorrect
Power590.2 hp (470 kW)correct
Cylinders6correct
Displacement18,900.8 cm³correct
AspirationTurbochargercorrect

Dimensions and weights

Ground clearance1,051.6correct

Working data

Pump flow490.2 l/mincorrect
Fuel tank capacity1,200.4 lcorrect

Other data

Cab height4,541.5correct

Frequently asked questions

How much power does the Hitachi EX1100 have?

The Hitachi EX1100 delivers 590 hp.

What engine does the Hitachi EX1100 have?

6 cylinders, 18,901 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare