StartExcavators & compactionHitachi › 180 LCN

Hitachi 180 LCN

Series: Hitachi Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Hitachi Hydraulic Excavator series from Hitachi includes the 180 LCN. The engine delivers 90.2 kW, with a displacement of 6,145.1 cm³. Torque is 55.6 Nm. The unladen weight is 19,024.6 kg. Ground clearance is 451.1 mm. The tank holds 320.2 litres. The pump delivers 191.2 l/min. The hydraulic tank holds 220.3 litres. The cooling system holds 18.2 litres. The oil fill is 17 litres. The electrical system runs on 24 V. The engine fitted is the A1-4JJ1X. The Hitachi Hydraulic Excavator series covers 158 models. Rated output within it ranges from 42.4 to 481.7 kW; the 180 LCN sits at the bottom of that range with 90.2 kW. Its immediate neighbours are the ZX160LC below it with 82 kW and the ZX120-3 above it with 93.1 kW. 347 Hitachi models across 20 series are on record. The model is listed under Excavators & compaction. 14 verified figures from 1 source are on file.

Technical data

Engine

Engine modelA1-4JJ1Xcorrect
Power90.2 kWcorrect
Torque55.6correct
Displacement6,145.1 cm³correct
AspirationTurbocharged, intercoolercorrect
Coolant capacity18.2 lcorrect
Engine oil capacity17 lcorrect

Dimensions and weights

Ground clearance451.1correct
Unladen weight19,024.6 kgcorrect

Drivetrain and chassis

System voltage24 Vcorrect

Working data

Pump flow191.2 l/mincorrect
Hydraulic oil capacity220.3 lcorrect
Fuel tank capacity320.2 lcorrect

Other data

Cab height2,950.5correct

Where this model stands

Power-to-weight ratio: 4.7 kW/t (90 kW / 19 t)

Stronger than 36% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Hitachi 180 LCN have?

The Hitachi 180 LCN delivers 90.2 kW.

How much does the Hitachi 180 LCN weigh?

The unladen weight is 19,025 kg.

What engine does the Hitachi 180 LCN have?

6,145 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare