Technical register for agricultural, construction and commercial machinery · sourced data
StartExcavators & compactionHitachi › EX280H-5

Hitachi EX280H-5

Series: Hitachi Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Hitachi Hydraulic Excavator series from Hitachi includes the EX280H-5. The engine delivers 125.1 kW. Rated speed is 2,050 rpm. The unladen weight is 27,600 kg. Ground clearance is 502.9 mm. The tank holds 380.1 litres. The engine fitted is the H07C-TD. The Hitachi Hydraulic Excavator series covers 158 models. Rated output within it ranges from 42.4 to 481.7 kW; the EX280H-5 sits in the lower part of that range with 125.1 kW. Its immediate neighbours are the ZX240LCK below it with 124.5 kW and the EX270-5 above it with 125.3 kW. 347 Hitachi models across 20 series are on record. The model is listed under Excavators & compaction. 7 verified figures from 1 source are on file.

Hitachi ZX — what the number and letters reveal about weight class

Hitachi codes usually start with ZX, short for the ZAXIS line. The following number places the model in an approximate operating-weight class, letters such as LC, US or W describe the undercarriage and configuration, and a dash number at the end marks the generation.

Read on 4 more paragraphs

LC marks a widened undercarriage for extra stability, US denotes ultra-short-tail models with a compact rear overhang for tight jobsites, and W marks wheeled machines. Current models run as ZAXIS-7, while older stock is still labelled -3, -5 or -6.

Alongside these sits the older EX line, such as the EX700: mechanically simpler than the ZX models, with less electronics, but built rugged for heavy continuous duty.

The collective entry spans small excavators from around 42 kW up to large machines above 480 kW. When buying used, check the hour meter along with the slew ring, boom-and-bucket linkage bushings and any leaks at the hydraulic cylinders.

In short: ZX plus size number plus undercarriage letter plus generation digit make up the full code, as seen on models like ZX120, ZX200 or ZX330.

Sources: Kennwerte der Modelle Hitachi Hydraulic Excavator, ZAXIS-7 Modellcode-Erklaerung, Hitachi Herstellerbroschuere, ZAXIS-7 Grossbagger-Broschuere, Hitachi

Technical data

Engine

Engine modelH07C-TDcorrect
Power125.1 kWcorrect
Rated speed2,050 rpmcorrect

Dimensions and weights

Ground clearance502.9correct
Unladen weight27,600 kgcorrect

Working data

Fuel tank capacity380.1 lcorrect

Other data

Cab height3,041.9correct

More machines with this engine (H07C-TD, 7)

Where this model stands

Power-to-weight ratio: 4.5 kW/t (125 kW / 27.6 t)

Stronger than 60% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Hitachi EX280H-5 have?

The Hitachi EX280H-5 delivers 125 kW.

How much does the Hitachi EX280H-5 weigh?

The unladen weight is 27,600 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare