Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Hanomag › Perfekt 400E

Hanomag Perfekt 400E

Built: 1967–1970 · Series: Perfekt

More machines from model year 1967

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Perfekt 400E from Hanomag is part of the Perfekt series. Production: 1967–1970. The engine delivers 34 hp (25 kW), has 4 cylinders, with a displacement of 1,797 cm³. Rated speed is 2,600 rpm. The unladen weight is 1,780 kg. Top speed is 20 km/h. The engine is water-cooled. The fuel is diesel. Construction: frameless unit construction. The gearbox offers 9 forward gears. There are also 3 reverse gears. The Perfekt series covers 5 models. Rated output within it ranges from 25 to 34 hp; the Perfekt 400E sits at the top of that range with 34 hp. Its immediate neighbours are the Perfekt 401 (S) below it with 32 hp. Unladen weight within it ranges from 1,675 to 1,780 kg; here the Perfekt 400E sits at the top of that range with 1,780 kg. 200 Hanomag models across 22 series are on record.

Hanomag Perfekt 301 to 401E (1950s) – the four-cylinder standard tractors from Hanover: E for electric start, S for special equipment, throughout a 1.8-litre diesel, 19 to 25 kW, 1.68 to 1.78 t

The Perfekt range was Hanomag's mid-segment standard tractor of the 1950s, built at the Hanover-Linden plant, which had made tractors since the 1930s. All Perfekt models share the same four-cylinder diesel engine of 1.8 litres; the type logic differentiates little by output through the number, but chiefly by equipment: E stands for the version with electric starter instead of a hand crank, S for upgraded special equipment, and the combination 401E(S) unites both in the latest development stage.

Read on 3 more paragraphs

The register lists 5 versions with a uniform 1,797 cm³ displacement, outputs of 19 to 25 kW and rated speeds of 2,400 to 2,600 rpm. Service weights range from 1,675 to 1,780 kg, and among the four measured models lengths run from 3,300 to 3,380 mm and widths from 1,560 to 1,580 mm.

As a uniformly engined range, the Perfekt stood for the typical West German post-war mechanisation of mid-size farms, competing with Deutz, Fendt and Eicher, who entered the same market segment with comparable power classes. After the Perfekt, Hanomag followed with the stronger Granit models.

On used tractors, operating hours, the condition of injection pump, cylinder head and clutch, the function of the electric starter on E models, rust on wings and bonnet, and linkage and PTO count; spare parts, as with all early Hanomag tractors, are largely the domain of specialist vintage-tractor dealers.

Sources: SpecCodex register, model data: Hanomag Perfekt

Technical data

Engine

Fueldieselcorrect
Power34 hp (25 kW)correct
Rated speed2,600 rpmcorrect
Cylinders4correct
Displacement1,797 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Unladen weight1,780 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Forward gears9correct
Reverse gears3correct
Top speed20 km/hcorrect

Origin and approval

Constructionframeless unit constructioncorrect

Where this model stands

Power-to-weight ratio: 14 kW/t (25 kW / 1.8 t)

Power class: Compact (< 40 hp)

Stronger than 20% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Hanomag Perfekt 400E have?

The Hanomag Perfekt 400E delivers 34 hp.

How much does the Hanomag Perfekt 400E weigh?

The unladen weight is 1,780 kg.

What engine does the Hanomag Perfekt 400E have?

4 cylinders, 1,797 cm³ displacement, Diesel.

How fast does the Hanomag Perfekt 400E go?

Top speed is 20 km/h.

When was the Hanomag Perfekt 400E built?

Production years: 1967–1970.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare