Genie GS2032 – specifications
Series: Genie Scissor Lift
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As an Aerial work platforms, the Genie GS2032 belongs to the Genie Scissor Lift series.
It will not go faster than 4 km/h — a working pace, not a travelling one. Unladen, it tips the scales at 1,621 kg.
Genie scissor lifts GS-1530 to GS-5390 RT – the market leader from Redmond near Seattle: GS for Genie Scissor, the number as platform height in feet and width in inches, RT for rough terrain
Genie of Redmond, Washington, is with JLG the world's largest maker of aerial work platforms – founded in 1966 with a compressed-air hoist to which the company owes its name, part of Terex since 2002 and, with the GS-1930 scissor lift, maker of the most-hired platform in the world. The type logic follows the American convention: GS stands for Genie Scissor, the first digits give the platform height in feet, the last the platform width in inches – a GS-1930 is 19 ft (5.8 m) high and 30 in (760 mm) wide, a GS-3246 32 ft and 46 in, a GS-5390 RT 53 ft (16 m) and 90 in – the models without suffix are the electric indoor lifts, RT the diesel rough-terrain lifts with all-wheel drive and oscillating axle, DC the electric rough-terrain lifts with battery drive. The rough-terrain lifts run on Kubota diesels and the Ford DSG-423 petrol engine, the indoor lifts on 24-volt battery and electro-hydraulics.
Read on 3 more paragraphs
The register lists 18 versions with capacities from 224 to 680 kg, service weights from 1,168 to 7,537 kg, lengths from 1,820 to 4,880 mm and widths from 760 to 2,292 mm; the rough-terrain lifts deliver 14.9 to 55.9 kW.
The GS range is the standard of every rental fleet: the GS-1930 fits through doors and into lifts, the GS-2646 and GS-3246 are the platforms of interior fit-out, the RT models those of façade and steel erectors.
On used lifts, operating hours, battery condition on electric models, play in scissor pins and rails, hydraulic tightness, the function of tilt and overload sensors and a valid periodic inspection count; parts run through the Genie network and are available worldwide.
Sources: SpecCodex register, model data: Genie Scherenbühnen, Genie (Terex, Hersteller, Redmond)
Technical data
Engine
| Drive type | electriccorrect |
|---|
Dimensions and weights
| Length | 2,440 mmcorrect |
|---|---|
| Width | 810 mmcorrect |
| Ground clearance | 90.2 mmcorrect |
| Unladen weight | 1,621 kgcorrect |
| Platform length | 2,260.1 mmcorrect |
| Platform width | 810 mmcorrect |
Drivetrain and chassis
| Tyre size | 15x5x11correct |
|---|---|
| Tyre type | Solid non-markingcorrect |
| Top speed | 3.5 km/hcorrect |
| Turning radius | 2,130 mmcorrect |
Working data
| Lifting capacity | 363 kgcorrect |
|---|---|
| Working height | 7,900 mmcorrect |
| Hydraulic oil capacity | 14.4 lcorrect |
| Lift time | 30 scorrect |
| Lowering time | 34 scorrect |
| Platform extension | 910.1 mmcorrect |
| Platform capacity | 363 kgcorrect |
Electrical data
| Number of batteries | 4correct |
|---|
Other data
| System voltage | 24 Vcorrect |
|---|
Used listings – figures from public listings
Between May and November 2026, speccodex recorded 13 public used-machine listings for Genie GS2032 on 4 platforms. Asking prices ranged from €2,500 to €13,890 (median €5,200), years of manufacture between 1999 and 2023.
Operating hours stated in the listings (median) by machine age: 8–12 years: 305 h (3 listings); over 12 years: 534 h (4 listings).
Offered mainly in Germany (64%), the Netherlands (18%) and Belgium (9%); shares refer to listings that state a location.
Asking prices are sellers' demands, not achieved sale prices. Basis: public listings, recorded and analysed by speccodex. As of: 18 Nov 2026. Sellers usually do not state whether prices are net or gross.
How much does a used Genie GS2032 cost? Price, range and year comparison
Area: Machines › Construction machinery
Frequently asked questions
How much does the Genie GS2032 weigh?
The unladen weight is 1,621 kg.
What are the dimensions of the Genie GS2032?
2,440 mm × 810 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 20 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: forklift-international.com (retrieved August 2026) · RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Telescopic platform in 3D section
Turn the model, look inside and click an assembly — each one is explained.