Genie GS3390RT – specifications
Series: Genie Scissor Lift
Build year not documented · Data origin: Directory data · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Genie scissor lifts GS-1530 to GS-5390 RT – the market leader from Redmond near Seattle: GS for Genie Scissor, the number as platform height in feet and width in inches, RT for rough terrain
Genie of Redmond, Washington, is with JLG the world's largest maker of aerial work platforms – founded in 1966 with a compressed-air hoist to which the company owes its name, part of Terex since 2002 and, with the GS-1930 scissor lift, maker of the most-hired platform in the world. The type logic follows the American convention: GS stands for Genie Scissor, the first digits give the platform height in feet, the last the platform width in inches – a GS-1930 is 19 ft (5.8 m) high and 30 in (760 mm) wide, a GS-3246 32 ft and 46 in, a GS-5390 RT 53 ft (16 m) and 90 in – the models without suffix are the electric indoor lifts, RT the diesel rough-terrain lifts with all-wheel drive and oscillating axle, DC the electric rough-terrain lifts with battery drive. The rough-terrain lifts run on Kubota diesels and the Ford DSG-423 petrol engine, the indoor lifts on 24-volt battery and electro-hydraulics.
Read on 3 more paragraphs
The register lists 18 versions with capacities from 224 to 680 kg, service weights from 1,168 to 7,537 kg, lengths from 1,820 to 4,880 mm and widths from 760 to 2,292 mm; the rough-terrain lifts deliver 14.9 to 55.9 kW.
The GS range is the standard of every rental fleet: the GS-1930 fits through doors and into lifts, the GS-2646 and GS-3246 are the platforms of interior fit-out, the RT models those of façade and steel erectors.
On used lifts, operating hours, battery condition on electric models, play in scissor pins and rails, hydraulic tightness, the function of tilt and overload sensors and a valid periodic inspection count; parts run through the Genie network and are available worldwide.
Sources: SpecCodex register, model data: Genie Scherenbühnen, Genie (Terex, Hersteller, Redmond)
Technical data
Engine
| Engine model | DSG-423correct |
|---|---|
| Fuel | gas/LPGcorrect |
| Power | 76 hp (55.9 kW)correct |
Dimensions and weights
| Length | 3,940 mmcorrect |
|---|---|
| Width | 2,292.1 mmcorrect |
| Wheelbase | 2,840.7 mmcorrect |
| Ground clearance | 360.2 mmcorrect |
| Unladen weight | 5,485 kgcorrect |
Drivetrain and chassis
| Tyre size | 12x33correct |
|---|---|
| Top speed | 8 km/hcorrect |
| Turning radius | 5,330 mmcorrect |
Working data
| Hydraulic oil capacity | 113.9 lcorrect |
|---|---|
| Fuel tank capacity | 113.9 lcorrect |
Used listings – figures from public listings
Between May and October 2026, speccodex recorded 8 public used-machine listings for Genie GS3390RT on 3 platforms. Asking prices ranged from €15,400 to €19,200 (median €18,800), years of manufacture between 2013 and 2017.
Offered mainly in Germany (100%); shares refer to listings that state a location.
Asking prices are sellers' demands, not achieved sale prices. Basis: public listings, recorded and analysed by speccodex. As of: 11 Nov 2026. Sellers usually do not state whether prices are net or gross.
More machines with this engine (DSG-423, 20)
Where this model stands
Power-to-weight ratio: 10.2 kW/t (56 kW / 5.5 t)
Stronger than 81% of the aerial work platforms in the register — out of 205 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Genie GS3390RT have?
The Genie GS3390RT delivers 76 hp.
How much does the Genie GS3390RT weigh?
The unladen weight is 5,485 kg.
How fast does the Genie GS3390RT go?
Top speed is 8 km/h.
What are the dimensions of the Genie GS3390RT?
3,940 mm × 2,292 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RitchieSpecs equipment specifications (retrieved August 2026) · Data sources and cross-checks
Telescopic platform in 3D section
Turn the model, look inside and click an assembly — each one is explained.
