Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Ford › F250 › F250 Custom

Ford F250 Custom

Built: 1973-1979 · Series: F250

More machines from model year 1973

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Ford F250 Custom belongs to the F250 series. Production: 1973-1979. The engine delivers 197 kW, has 8 cylinders, with a displacement of 6,400 cm³. The vehicle is 6,070 mm long and 2,010 mm wide. The unladen weight is 2,305 kg. The wheelbase measures 3,380 mm. The gross vehicle weight is 3,401 kg. The vehicle runs on 4 wheels. The gearbox offers 3 gears. The F250 series covers 36 models. Unladen weight within it ranges from 1,909 to 3,200 kg; the F250 Custom sits in the lower part of that range with 2,305 kg. Its immediate neighbours are the F250 XLT PU 4X4 below it with 2,176 kg and the F250 SPORT CUSTOM above it with 2,340 kg. Gross vehicle weight within it ranges from 2,970 to 3,500 kg; here the F250 Custom sits in the upper part of that range with 3,401 kg. 5516 Ford models across 101 series are on record.

Ford F250 – collective page of the F-250 pickup from the F-Series/Super Duty line: exclusively V8 engines from 3,600 to 7,600 cm³, gross weights up to 3,500 kg, cab variants from standard to Crew Cab

This page gathers versions of the Ford F-250, the heavier-duty step within the American F-Series. Since the 1990s the F-250 has been marketed together with the F-350 and F-450 under the Super Duty name and is used in the US for towing, construction-site work and as a tow vehicle for recreational trailers. The model list shows the range of body variants from the two-door standard cab through the extended Supercab to the four-door Crew Cab, together with trim lines such as XLT and Lariat and the rugged Custom specification.

Read on 3 more paragraphs

The register lists 36 versions here, exclusively with V8 engines of 3,600 to 7,600 cm³, kerb weights of 1,909 to 3,200 kg, gross vehicle weights of 2,970 to 3,500 kg, lengths of 5,370 to 6,070 mm and widths of 1,970 to 2,400 mm.

In the US the F-250 competes with the Chevrolet/GMC 2500 and the Dodge/Ram 2500 in the segment of heavy pickups for towing and construction work, and is rarer outside North America but sought after as an imported and collector's vehicle. The V8 engines range from carburettor and early fuel-injected versions to the Power Stroke diesel, which made the F-250 suitable for sustained heavy-duty work.

On imported examples it is worth checking the frame for corrosion, especially at the spring mounts and around the tow hitch, and the condition of the load bed. On the diesel engines, the injection pump, turbocharger and cylinder head gaskets are known wear points, while the petrol V8s should be checked for carburettor or early injection condition and the ignition system. Spare parts are readily obtainable through American import trade and specialist pickup workshops in Europe.

Sources: SpecCodex register, model data: Ford F250, Ford (manufacturer)

Technical data

Engine

Power197 kWcorrect
Cylinders8correct
Displacement6,400 cm³correct

Dimensions and weights

Length6,070 mmcorrect
Width2,010 mmcorrect
Wheelbase3,380 mmcorrect
Unladen weight2,305 kgcorrect
Gross vehicle weight3,401 kgcorrect

Drivetrain and chassis

Gears3correct
Wheels4correct

Where this model stands

Power-to-weight ratio: 85.5 kW/t (197 kW / 2.3 t)

Stronger than 98% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Ford F250 Custom have?

The Ford F250 Custom delivers 197 kW.

How much does the Ford F250 Custom weigh?

The unladen weight is 2,305 kg.

What is the gross vehicle weight of the Ford F250 Custom?

3,401 kg.

What engine does the Ford F250 Custom have?

8 cylinders, 6,400 cm³ displacement.

What are the dimensions of the Ford F250 Custom?

6,070 mm × 2,010 mm.

When was the Ford F250 Custom built?

Production years: 1973-1979.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare