Fiat Trattori 25 R – specifications
Built: 1953–1957 · Series: R-Baureihe
The Fiat Trattori 25 R belongs to the R series. Production: 1953–1957. The engine delivers 24 hp (17.7 kW), has 4 cylinders, with a displacement of 1,901 cm³. Torque is 94 Nm. Rated speed is 2,000 rpm. The machine is 2,515 mm long, 1,515 mm wide and 1,313 mm high. The unladen weight is 1,595 kg. The wheelbase measures 1,560 mm. Ground clearance is 390 mm. Top speed is 15 km/h. Transmission: 4 V/1 R or 5 V/1 R. The engine is water-cooled. Tyres: front 5.50-16 ASF, rear 10-28 AS. The fuel is Benzin/Diesel. The bore measures 82 mm. The stroke is 90 mm. The compression ratio is 20:1. Maximum torque is reached at 1,200 rpm. Construction: frame construction. Injection pressure is 118 bar. The R-Baureihe series covers 10 models. Rated output within it ranges from 19 to 84 hp; the 25 R sits at the bottom of that range with 24 hp. Its immediate neighbours are the 211 R (A) below it with 20 hp and the 312-R/342-R above it with 29 hp. Unladen weight within it ranges from 830 to 3,760 kg; here the 25 R sits in the lower part of that range with 1,595 kg. 99 Fiat Trattori models across 9 series are on record.
Data for the version built 1953–1957 · Data origin: Reference work (Wikipedia/Wikibooks) · sources
More machines from model year 1953
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fiat R series (1951–1968) – the wheeled tractors before the Nastro d'Oro: R for ruote, 25 R, 55 R, 18 R 'La Piccola', 211 R to 513 R and 80 R, the first digits as hp, 14 to 62 kW
The R in Fiat's type designation stands for ruote, wheels – the counterpart to the C of the crawlers – and the R series gathers the wheeled tractors with which Fiat Trattori motorised Italian agriculture from the early 1950s to the Nastro d'Oro of 1968. The 25 R of 1951 founded the post-war range, the 55 R followed in 1955 as the four-cylinder mid-range, the 18 R 'La Piccola' of 1957 was the small tractor for farms of a few hectares, and the three-digit 211 R, 312 R, 342 R and 513 R of 1958 to 1968 formed the generation that made Fiat Italy's largest tractor maker. The type logic: on the two-digit types the number gives the output in hp, on the three-digit ones the first digit the cylinder count and the following ones the hp in Fiat's reckoning – 211 R a two-cylinder, 513 R a four-cylinder of the upper class – and (A) marks four-wheel drive.
Read on 3 more paragraphs
The register lists 10 versions with 14 to 61.8 kW, 1,135 to 6,872 cm³ with two to four cylinders, torque from 63 to 412 Nm, unladen weights from 830 to 3,760 kg, lengths from 2,515 to 3,734 mm, widths from 1,203 to 1,990 mm and heights from 1,313 to 1,895 mm; eight models run on diesel, two optionally on petrol.
The R tractors were the tractors of the Italian economic miracle: simple, robust, built under licence in Argentina, Spain and Turkey – the root of the Fiat kinship that reaches to Fiat Concord and Türk Traktör.
Used R Fiats are collector tractors with a lively scene in Italy; when buying, engine condition, gearbox, originality and parts supply, which is good through Italian remanufacturers, are what count.
Sources: SpecCodex register, model data: Fiat Trattori R-Baureihe, Fiat Trattori (Wikipedia)
Technical data
Engine
| Fuel | Benzin/Dieselcorrect |
|---|---|
| Power | 24 hp (17.7 kW)correct |
| Rated speed | 2,000 rpmcorrect |
| Torque | 94 Nmcorrect |
| Speed at max. torque | 1,200 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 1,901 cm³correct |
| Bore | 82 mmcorrect |
| Stroke | 90 mmcorrect |
| Compression ratio | 20correct |
| Injection pressure | 118 barcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 2,515 mmcorrect |
|---|---|
| Width | 1,515 mmcorrect |
| Height | 1,313 mmcorrect |
| Wheelbase | 1,560 mmcorrect |
| Ground clearance | 390 mmcorrect |
| Unladen weight | 1,595 kgcorrect |
Drivetrain and chassis
| Drive | rear- or four-wheel drivecorrect |
|---|---|
| Gearbox | 4 V/1 R or 5 V/1 Rcorrect |
| Front tyres | 5.50-16 ASFcorrect |
| Rear tyres | 10-28 AScorrect |
| Top speed | 15 km/hcorrect |
Origin and approval
| Construction | frame constructioncorrect |
|---|
Frequently asked questions
Where this model stands
Power-to-weight ratio: 11.1 kW/t (18 kW / 1.6 t)
Power class: Compact (< 40 hp)
Stronger than 10% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.