Fiat Allis FL20
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fiat-Allis – other models: the collective page of construction machines FB-80 and FB7B (backhoe loaders), FD110 and FD30B (crawler dozers), FL175 and FL20 (wheel loaders) and SL40B and SL55B (skid-steer loaders), 27 to 250 kW
This page gathers eight Fiat-Allis construction machines that the register could not assign to a named range: the backhoe loaders FB-80 and FB7B, the crawler dozers FD110 and FD30B, the wheel loaders FL175 and FL20, and the skid-steer loaders SL40B and SL55B. Fiat-Allis was formed in 1974 as a joint venture between Fiat and the American maker Allis-Chalmers, combining their construction equipment programmes until the 1990s, when the business passed to Fiat-Hitachi and later to New Holland's construction equipment division; accordingly both Fiat and New Holland engines are recorded for the models covered here.
Read on 3 more paragraphs
The register lists here 8 versions with 27 to 250 kW, or 36 to 340 hp; all eight run on diesel.
With a line-up spanning backhoe loaders, crawler dozers, wheel loaders and skid-steer loaders, Fiat-Allis covered nearly the whole spectrum of earthmoving and civil engineering machinery through the 1970s to 1990s, competing in Europe and North America with makers such as Caterpillar, Case and JCB.
When buying used, what counts on these older Fiat-Allis machines is frame cracking and corrosion on load-bearing parts, the condition of hydraulic cylinders and hoses, and wear on the undercarriage or tyres; on the dozers, track rollers, track links and drive sprockets are added to the list. Because of the company's shifting history, spare parts are sometimes only available through specialist used-machinery dealers.
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 225 hp (168 kW)correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | tracked undercarriagecorrect |
|---|
Frequently asked questions
How much power does the Fiat Allis FL20 have?
The Fiat Allis FL20 delivers 225 hp.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Excavator in 3D section
Turn the model, look inside and click an assembly — each one is explained.