Technical register for agricultural, construction and commercial machinery · sourced data

Fiat Allis FD30B

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Fiat Allis FD30B is a machine built by Fiat Allis. The engine delivers 340 hp (250 kW). The engine comes from Fiat. Drive: tracked undercarriage. The engine is water-cooled. The fuel is diesel. Its predecessor was the Fiat-Allis FD30. It was succeeded by the Fiat-Allis FD30C. Rated output across the Fiat Allis range ranges from 36 to 340 hp; the FD30B sits at the top of that range with 340 hp. Its immediate neighbours are the FL20 below it with 225 hp. 8 Fiat Allis models are on record. The model is listed under Excavators & compaction. 9 verified figures from 1 source are on file.

Technical data

Engine

Engine makeFiatcorrect
Fueldieselcorrect
Power340 hp (250 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Drivetracked undercarriagecorrect

Other data

PredecessorFiat-Allis FD30correct
SuccessorFiat-Allis FD30Ccorrect

Frequently asked questions

How much power does the Fiat Allis FD30B have?

The Fiat Allis FD30B delivers 340 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare