Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › Other models › 309C

Fendt 309C – specifications

Built: 2003 · Series: Other models

Data for the version built 2003 · Data origin: Official register · sources

More machines from model year 2003

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 309C comes from Fendt. Production: 2003. The engine delivers 70 kW, has 4 cylinders, with a displacement of 3,190 cm³. The machine is 2,140 mm wide. The unladen weight is 4,220 kg. The gross vehicle weight is 7,500 kg. Rated output across the Fendt range ranges from 3 to 408 kW; the 309C sits in the lower part of that range with 70 kW. Its immediate neighbours are the FAVORIT 610LS below it with 69.5 kW and the FENDT 209 VARIO above it with 71 kW. Unladen weight across the Fendt range ranges from 510 to 23,000 kg; here the 309C sits in the lower part of that range with 4,220 kg. 1545 Fendt models across 89 series are on record.

Fendt – other models: the collective page of tractors outside the named ranges, from the Farmer and Favorit types of the LS and LSA era (308 LSA, 312 LSA) through the narrow-track 200 V/F/P to the Vario generations 300

This page gathers the Fendt tractors the register could not assign to a named range – the brand from Marktoberdorf in the Allgäu that began in 1930 with the Dieselross, presented with the Vario in 1995 the first production-ready stepless transmission in farm machinery and has belonged to AGCO since 1997. The type logic: the Farmer and Favorit ranges of the 1970s to 1990s give the range and size in the three-digit number (Farmer 308 as a 300, Favorit 612 as a 600), LS, LSA and Turbomatik the equipment, cab and turbo-clutch drive; since 1995 all tractors are called Vario, with the first digit as range (200 to 1000) and the following ones as power step – 312 Vario about 120 hp, 724 Vario about 240 hp, 1050 Vario about 500 hp – the suffixes V, F and P mark the narrow-track models of the 200s for vineyard, orchard and plantation, Gen3 to Gen7 the generations, Profi and Power the equipment lines. The engines came from MWM and Deutz in the old, Sisu and AGCO Power in the medium and MAN in the big 900 and 1000 ranges.

Read on 3 more paragraphs

The register lists here 204 versions with 3 to 368 kW from one- to six-cylinders of 308 to 12,419 cm³, PTO outputs from 106 to 300 hp on the recorded big tractors, torque from 204 to 2,400 Nm, unladen weights from 510 to 23,000 kg, lengths from 2,750 to 6,157 mm and widths from 1,073 to 3,000 mm.

Fendt is the premium brand of European farm machinery with the highest resale value and Germany's market leader for years; the 1050 Vario is the most powerful standard wheeled tractor, the 200 V the best-selling vineyard tractor.

On used tractors, operating hours, Vario transmission (oil history, calibration), engine and exhaust aftertreatment, front-axle and cab suspension, electronics and terminal, on the LS and LSA types turbo clutch and gearbox count; parts run through the AGCO network.

Sources: SpecCodex register, model data: Fendt (weitere Modelle), Fendt (AGCO, Hersteller, Marktoberdorf)

Technical data

Engine

Power70 kWcorrect
Cylinders4correct
Displacement3,190 cm³correct

Dimensions and weights

Width2,140 mmcorrect
Unladen weight4,220 kgcorrect
Gross vehicle weight7,500 kgcorrect

Where this model stands

Power-to-weight ratio: 16.6 kW/t (70 kW / 4.2 t)

Power class: Universal (40–100 hp)

Stronger than 63% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt 309C have?

The Fendt 309C delivers 70 kW.

How much does the Fendt 309C weigh?

The unladen weight is 4,220 kg.

What is the gross vehicle weight of the Fendt 309C?

7,500 kg.

What engine does the Fendt 309C have?

4 cylinders, 3,190 cm³ displacement.

When was the Fendt 309C built?

Production years: 2003.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​‌‍‍‌‍⁠‍‌‌‌‍‍‌‌‌‌⁠​⁠

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Latvian open data portal (retrieved August 2026) · Data sources and cross-checks

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare