Fendt 206 V 2WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Fendt 206 V is a tractor made by Fendt. Under the bonnet works a three-cylinder engine displacing 3.2 litres, producing 65 hp (44.1 kW). Rated output is reached at 2,300 rpm, so it works in the lower rev range.
Top speed is 35 km/h. It is 1.07 m wide. Unladen weight is 2,200 kg.
Within the range, rated power spans from 4 to 500 hp; with 65.3 hp, the 206 V sits at the bottom end. Directly alongside are the Grasmäher with 4 hp below and the 207 F with 73.5 hp above.
Technical data
Engine
| Power | 65.3 hp (44.1 kW)correct |
|---|---|
| Rated speed | 2,300 rpmcorrect |
| Torque | 239correct |
| Speed at max. torque | 1,500 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 3,236.4 cm³correct |
Dimensions and weights
| Width | 1,072.9correct |
|---|---|
| Wheelbase | 1,999.5correct |
| Unladen weight | 2,200 kgcorrect |
Drivetrain and chassis
| Gearbox type | Overdrive, fully synchronmesh, close-ratiocorrect |
|---|---|
| Forward gears | 20correct |
| Reverse gears | 6correct |
| Top speed | 35.1 km/hcorrect |
Working data
| Pump flow | 74.2 l/mincorrect |
|---|---|
| Fuel tank capacity | 70 lcorrect |
Where this model stands
Power-to-weight ratio: 20 kW/t (44 kW / 2.2 t)
Power class: Universal (40–100 hp)
Stronger than 43% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Fendt 206 V have?
The Fendt 206 V delivers 65.3 hp.
How much does the Fendt 206 V weigh?
The unladen weight is 2,200 kg.
What engine does the Fendt 206 V have?
3 cylinders, 3,236 cm³ displacement.
How fast does the Fendt 206 V go?
Top speed is 35.1 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.