Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › Farmer 200 series › Farmer 260 P/PA

Fendt Farmer 260 P/PA (43.9 kW)

Built: 1988–1992 · Series: Farmer 200er-Reihe

More machines from model year 1988

Source: landwirt.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Farmer 260 P/PA from Fendt is part of the Farmer 200er-Reihe series. Production: 1988–1992. The engine delivers 60 hp (43.9 kW), has 3 cylinders, with a displacement of 3,064 cm³. Rated speed is 2,400 rpm. The machine is 3,516 mm long, 1,533 mm wide and 2,221 mm high. The unladen weight is 2,340 kg. The wheelbase measures 2,050 mm. Ground clearance is 257 mm. Top speed is 40 km/h. Transmission: 21V/6R. The engine is air-cooled. Tyres: front 7.50-16 ( A: 7.50-18 ), rear 13.6 R 28. The fuel is diesel. Construction: unit construction (no separate frame). Around 157 ( A: 304 ) units were built. The Farmer 200er-Reihe series covers 4 models. Rated output within it ranges from 50 to 75 hp; the Farmer 260 P/PA sits in the middle of that range with 60 hp. Its immediate neighbours are the Farmer 250 S/SA below it with 50 hp and the Farmer 275 S/SA above it with 75 hp. Unladen weight within it ranges from 1,625 to 2,680 kg; here the Farmer 260 P/PA sits in the upper part of that range with 2,340 kg. 1545 Fendt models across 89 series are on record.

Fendt Farmer 200 series – 1980s range with vineyard and four-wheel-drive versions: three- to four-cylinder diesels, 36.6 to 55 kW, V, S and A variants

The Farmer 200 series emerged in the 1980s and, with the 203, 250, 260 and 275 types, spanned a wide range within one series. The letter V marks the narrow-track vineyard version, S the standard-track version, and the appended A suffix the four-wheel-drive variant.

Read on 3 more paragraphs

The register lists here four versions with 36.6 to 55 kW (50 to 75 hp) from three- to four-cylinder engines of 2,826 to 4,086 cm3 displacement. Unladen weight ranges from 1,625 to 2,680 kg, overall length from 2,780 to 3,646 mm. Width stretches from 920 mm on the narrow vineyard version to 1,880 mm on the standard version, and height from 1,280 to 2,320 mm. Torque ranges from 176 to 265 Nm at a rated speed of 2,300 to 2,400 rpm.

With parallel standard and vineyard versions, the Farmer 200 series covered both classic arable farms and specialist viticulture in narrow vine rows, a modular principle typical of Fendt built on shared drivetrain technology and adapted track width.

On a used purchase, the vineyard versions in particular call for checking the frame and axles for distortion from steep-slope work; on all versions, the clutch, gearbox, tightness of the hydraulics and lift linkage, and rust on the frame and mudguards should be checked. Spare parts are still supplied by the Fendt/AGCO network and by specialist viticultural-machinery dealers for the V versions.

Sources: SpecCodex register, model data: Fendt Farmer 200er-Reihe, Fendt (AGCO, Hersteller)

Technical data

Engine

Fueldieselcorrect
Power60 hp (43.9 kW)correct
Rated speed2,400 rpmcorrect
Cylinders3correct
Displacement3,064 cm³correct
Coolingair-cooledcorrect

Dimensions and weights

Length3,516 mmcorrect
Width1,533 mmcorrect
Height2,221 mmcorrect
Wheelbase2,050 mmcorrect
Ground clearance257 mmcorrect
Unladen weight2,340 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox21V/6Rcorrect
Front tyres7.50-16 ( A: 7.50-18 )correct
Rear tyres13.6 R 28correct
Top speed40 km/hcorrect

Origin and approval

Constructionunit construction (no separate frame)correct
Units built157 ( A: 304 )correct

Where this model stands

Power-to-weight ratio: 18.8 kW/t (44 kW / 2.3 t)

Power class: Universal (40–100 hp)

Stronger than 41% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt Farmer 260 P/PA have?

The Fendt Farmer 260 P/PA delivers 60 hp.

How much does the Fendt Farmer 260 P/PA weigh?

The unladen weight is 2,340 kg.

What engine does the Fendt Farmer 260 P/PA have?

3 cylinders, 3,064 cm³ displacement, Diesel.

How fast does the Fendt Farmer 260 P/PA go?

Top speed is 40 km/h.

What are the dimensions of the Fendt Farmer 260 P/PA?

3,516 mm × 1,533 mm × 2,221 mm.

When was the Fendt Farmer 260 P/PA built?

Production years: 1988–1992.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare