Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Fendt › Dieselross › Dieselross F40 / F40 U

Fendt Dieselross F40 / F40 U

Built: 1951–1959 · Series: Dieselross

More machines from model year 1951

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Fendt Dieselross F40 / F40 U belongs to the Dieselross series. Production: 1951–1959. The engine delivers 40 hp (29 kW), has 3 cylinders, with a displacement of 3,534 cm³. Rated speed is 1,500 rpm. The machine is 3,440 mm long, 1,850 mm wide and 1,800 mm high. The unladen weight is 2,400 kg. The wheelbase measures 2,225 mm. Ground clearance is 460 mm. Top speed is 28 km/h. Transmission: 5/6v/1r. The engine is water-cooled. Tyres: front 6.00-20, rear 13-30. The fuel is diesel. Construction: frameless unit construction. Around 1030 units were built. The Dieselross series covers 15 models. Rated output within it ranges from 9 to 40 hp; the Dieselross F40 / F40 U sits at the top of that range with 40 hp. Its immediate neighbours are the Dieselross G25 Holzgas below it with 25 hp. Unladen weight within it ranges from 800 to 2,400 kg; here the Dieselross F40 / F40 U sits at the top of that range with 2,400 kg. 1545 Fendt models across 89 series are on record.

Fendt Dieselross (1930–1958) – the first small tractor with a diesel engine: F9, F12, F15 to F28, G25 wood gas, F236 and F237, 6.6 to 29 kW

The Dieselross is the tractor with which Fendt began: in 1930 the Marktoberdorf machine works built the first small tractor with a diesel engine – 6 hp, a Deutz single-cylinder, cutter bar and trailer hitch for farms that could not afford a Lanz Bulldog. The name stayed until 1958 and was only then replaced by the Farmer and Favorit. The type number gives the output in hp: F9 with 9 hp, F12, F15, F17, F18, F22, F24, F28; G stands for producer-gas operation – the G25 Holzgas ran on a wood gasifier during the war – H for the version with hydraulics, the three-digit F236 and F237 are the last Dieselross of the 1950s with MWM engines, the FL 114 an early type of the Farmer range. The engines came from Deutz and MWM, one to three cylinders, air- and water-cooled.

Read on 3 more paragraphs

The register lists 15 versions with 6.6 to 29 kW (9 to 25 hp), 657 to 3,979 cm³ with one to three cylinders, unladen weights from 800 to 2,400 kg, lengths from 2,280 to 3,440 mm, widths from 980 to 1,850 mm and heights from 1,290 to 1,800 mm; eleven models run on diesel, one on wood gas.

The Dieselross turned Fendt from a farm-machinery repair shop into a tractor maker and founded the brand's reputation for comfort: even the F12 had a sprung seat, and the Dieselross of the 1950s gained mower, belt pulley and PTO as standard.

Used Dieselross are the classic collector tractors of southern Germany with an active club scene; when buying, originality of engine and sheet metal, compression and injection pump, gearbox and brakes and the completeness of mower and accessories are what count.

Sources: SpecCodex register, model data: Fendt Dieselross, Fendt (AGCO, Hersteller), Fendt Dieselross (Wikipedia)

Technical data

Engine

Fueldieselcorrect
Power40 hp (29 kW)correct
Rated speed1,500 rpmcorrect
Cylinders3correct
Displacement3,534 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,440 mmcorrect
Width1,850 mmcorrect
Height1,800 mmcorrect
Wheelbase2,225 mmcorrect
Ground clearance460 mmcorrect
Unladen weight2,400 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox5/6v/1rcorrect
Front tyres6.00-20correct
Rear tyres13-30correct
Top speed28 km/hcorrect

Origin and approval

Constructionframeless unit constructioncorrect
Units built1,030correct

Where this model stands

Power-to-weight ratio: 12.1 kW/t (29 kW / 2.4 t)

Power class: Compact (< 40 hp)

Stronger than 24% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Fendt Dieselross F40 / F40 U have?

The Fendt Dieselross F40 / F40 U delivers 40 hp.

How much does the Fendt Dieselross F40 / F40 U weigh?

The unladen weight is 2,400 kg.

What engine does the Fendt Dieselross F40 / F40 U have?

3 cylinders, 3,534 cm³ displacement, Diesel.

How fast does the Fendt Dieselross F40 / F40 U go?

Top speed is 28 km/h.

What are the dimensions of the Fendt Dieselross F40 / F40 U?

3,440 mm × 1,850 mm × 1,800 mm.

When was the Fendt Dieselross F40 / F40 U built?

Production years: 1951–1959.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare