Technical register for agricultural, construction and commercial machinery · sourced data
Start › Excavators & compaction › Doosan › S225LCSLR

Doosan S225LCSLR

Series: Doosan Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the S225LCSLR, Doosan offers a model from the Doosan Hydraulic Excavator series. The engine delivers 110.4 kW, with a displacement of 5,786.3 cm³. Rated speed is 1,950 rpm. The unladen weight is 23,586.8 kg. Ground clearance is 481.6 mm. The tank holds 350.2 litres. The pump delivers 430 l/min. The hydraulic tank holds 240.4 litres. Working pressure is 323.4 bar. The cooling system holds 42 litres. The oil fill is 19.3 litres. The engine fitted is the DB58TIS. The Doosan Hydraulic Excavator series covers 29 models. Rated output within it ranges from 70.8 to 278.1 kW; the S225LCSLR sits in the lower part of that range with 110.4 kW. Its immediate neighbours are the DX180LC-5 below it with 96.2 kW and the DX225LC-5 above it with 120.8 kW. 314 Doosan models across 20 series are on record. The model is listed under Excavators & compaction. 13 verified figures from 1 source are on file.

Doosan DX — the number is the tonnage class, LC means the extended track

The "Doosan Hydraulic Excavator" bucket lists 29 models of the DX line, spanning 70 to 278 kW and 13.9 to nearly 53 tonnes of operating weight — from a mid-size tracked excavator to a large jobsite machine. The sample models DX140LC, DX225LC, DX300LC, DX350LC and DX420LC show the consistent naming pattern.

Read on 4 more paragraphs

At Doosan, the DX prefix is followed directly by a number that roughly reflects the machine's operating weight in tonnes — a DX225LC sits in the 22-to-23-tonne class. The LC suffix denotes an extended and widened crawler undercarriage, giving more footprint and thus stability during lifting work as well as better flotation on soft ground; models without the suffix run on the narrower standard gauge.

In practice that means two Doosan excavators with a similar number, one with LC and one without, differ mainly in undercarriage width rather than in displacement or engine power.

For a used excavator in this class, check the track rollers, chain tension and the bucket and arm bushings — the most common wear points under continuous jobsite use. A test run at full hydraulic load also shows whether the pump and valves still deliver full cylinder force.

In short: on the DX line, the number reveals the rough tonnage class and the LC suffix the undercarriage width, without needing to consult a spec sheet.

Sources: Kennwerte der Modelle Doosan Hydraulic Excavator, — Bedeutung der Buchstaben bei Baggermodellen (cm-sv.com), — Doosan DX225LC Hydraulic Excavator (RitchieSpecs)

Technical data

Engine

Engine modelDB58TIScorrect
Power110.4 kWcorrect
Rated speed1,950 rpmcorrect
Displacement5,786.3 cm³correct
Coolant capacity42 lcorrect
Engine oil capacity19.3 lcorrect

Dimensions and weights

Ground clearance481.6correct
Unladen weight23,586.8 kgcorrect

Working data

Pump flow430 l/mincorrect
Hydraulic oil capacity240.4 lcorrect
Hydraulic pressure323.4 barcorrect
Fuel tank capacity350.2 lcorrect

Other data

Cab height3,002.3correct

More machines with this engine (DB58TIS, 13)

Where this model stands

Power-to-weight ratio: 4.7 kW/t (110 kW / 23.6 t)

Stronger than 49% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Doosan S225LCSLR have?

The Doosan S225LCSLR delivers 110 kW.

How much does the Doosan S225LCSLR weigh?

The unladen weight is 23,587 kg.

What engine does the Doosan S225LCSLR have?

5,786 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare