Deutz-Fahr 8280 TTV
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Deutz‑Fahr 8280 TTV is a tractor from the manufacturer’s line, powered by a six‑cylinder engine with a displacement of 6.057 cm³ delivering 268 hp (197 kW). It produces a torque of 1.226 Nm and is equipped with the continuously variable TTV gearbox T7780, providing seamless power delivery. The wheelbase measures 2.918 mm and the lift category is Cat III, allowing it to handle heavy implements.
A power output of 268 hp combined with 1.226 Nm of torque enables the 8280 TTV to pull substantial loads over uneven terrain without a major loss of performance. The stepless TTV gearbox allows precise speed adjustments, which is beneficial when operating front loaders or mower attachments. The relatively long wheelbase contributes to a lower ground pressure, reducing sinkage on soft ground and helping to preserve soil structure.
Tractors of this size and specification are typically used for extensive field operations that require high pulling power and continuous torque. They are suitable for heavy implements such as front loaders, mulchers, or large harvesting attachments, and can be employed in both grain and vegetable production.
Deutz-Fahr – other models: the collective page of tractors outside the named ranges, from the MK3-generation classics through the 4 and 5 series to models with KEYLINE and TTV specification
This page gathers the Deutz-Fahr tractors the register could not assign to a named range – from older model years such as the 100 to 260 MK3 range through the four-cylinder 4 series (4.5, 4.56, 4.85, 4006) to the broad mid-range 5 series with types from 5060 to 5120. Deutz, founded in 1864 by Nikolaus Otto in Cologne as an engine works, merged its tractor business with that of the Fahr machinery works of Gottmadingen in 1968 to form Deutz-Fahr; since 1995 the brand has belonged to the Italian SAME-Deutz-Fahr group (SDF), which builds the tractors in Lauingen on the Danube in Bavaria. In the 5 series the type designation clearly tracks the power: the 5090 has about 90 hp, the 5105 about 105 hp, the 5115 about 115 hp; the suffixes KEYLINE, ECOLINE and TTV denote the equipment level and stepless transmission, D and DT four-wheel drive.
Read on 3 more paragraphs
The register lists here 213 versions with 35 to 211.1 kW (47 to 268 hp) from three- to six-cylinders of 1,758 to 7,146 cm³, unladen weights from 2,800 to 10,725 kg, gross weights from 4,500 to 16,000 kg, lengths from 2,980 to 5,820 mm, widths from 2,008 to 2,944 mm and heights from 2,020 to 3,225 mm.
Deutz-Fahr is one of Europe's longest-established tractor brands and a fixture in the mid and upper power segment in Germany, Italy and much of southern Europe; the brand's distinctive green paint and cab design have shaped its image for decades.
On used tractors, engine condition and rust on the bodywork count on the older MK3 and 4-series models, on the 5 series the transmission (mechanical, KEYLINE or stepless TTV), hydraulics and electronics, and on the DF and G variants the condition of the four-wheel-drive clutch; parts run through the SDF network and in part through Same and Lamborghini workshops.
Sources: SpecCodex register, model data: Deutz-Fahr (weitere Modelle), Deutz-Fahr (SDF, Hersteller)
Technical data
Engine
| Power | 268 hp (197 kW)correct |
|---|---|
| Torque | 1,226 Nmcorrect |
| Cylinders | 6correct |
| Displacement | 6,057 cm³correct |
Dimensions and weights
| Wheelbase | 2,918 mmcorrect |
|---|
Drivetrain and chassis
| Gearbox | Stufenloses TTV-Getriebe T7780correct |
|---|
Other data
| Linkage category | Cat IIIcorrect |
|---|
Frequently asked questions
How much power does the Deutz-Fahr 8280 TTV have?
The Deutz-Fahr 8280 TTV delivers 268 hp.
What engine does the Deutz-Fahr 8280 TTV have?
6 cylinders, 6,057 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: UK government data (DVLA) (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
