Deutz-Fahr D 4007
Built: 1980–1987 · Series: 07-Reihe
More machines from model year 1980
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Deutz-Fahr D 4007: air-cooled three-cylinder standard tractor of the 07 range with 2,826 cm³ displacement, 35 hp (25.6 kW) and 1,980 kg weight
In the 1980s, Deutz-Fahr built a broad line-up of standard tractors in the 07 range for holdings of different sizes, from small three-cylinder models to larger four-cylinder versions. The D 4007 forms the lower output segment of this range and is aimed at smaller agricultural operations with a simple but solid need for pulling power.
Read on 3 more paragraphs
The three-cylinder diesel engine with 2,826 cm³ displacement is air-cooled and produces 35 hp, or 25.6 kW, at 2,150 rpm, with torque of 156 Nm. At 1,980 kg weight, 3,470 mm length, 1,560 mm width and 2,360 mm height, the D 4007 ranks among the lighter tractors of the 07 range, staying manoeuvrable enough for small fields and tight farmyards.
A top speed of 25 km/h places the D 4007 in driving licence category L (up to 40 km/h). The air-cooled three-cylinder engine with 35 hp suits smaller field tasks, grassland maintenance and transport, but not the operation of heavy implements or large trailers; its limited torque of 156 Nm restricts drawbar performance on heavy soils. For implements run through the power take-off and the three-point linkage, the machine still remains versatile.
When buying a D 4007, check the condition of the cooling-air ducting of the three-cylinder engine and the fins on the cylinder head, since dirt or damage here worsens cooling of the small engine. Also check the clutch, gearbox and hydraulic pump, whose components on this small standard tractor are simpler in design but just as prone to wear after decades, along with the condition of the tyres and brakes, which see particular strain from frequent yard use.
Sources: SpecCodex-Register: Kennwerte des Modells Deutz-Fahr D 4007, Deutz-Fahr (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 35 hp (25.6 kW)correct |
| Rated speed | 2,150 rpmcorrect |
| Torque | 156 Nmcorrect |
| Cylinders | 3correct |
| Displacement | 2,826 cm³correct |
| Bore | 100 mmcorrect |
| Stroke | 120 mmcorrect |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 3,470 mmcorrect |
|---|---|
| Width | 1,560 mmcorrect |
| Height | 2,360 mmcorrect |
| Wheelbase | 1,995 mmcorrect |
| Ground clearance | 430 mmcorrect |
| Unladen weight | 1,980 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 8V / 2Rcorrect |
| Forward gears | 8correct |
| Reverse gears | 2correct |
| Front tyres | 7.50-16 ASFcorrect |
| Rear tyres | 12.4-32 AScorrect |
| Top speed | 25 km/hcorrect |
Working data
| Fuel tank capacity | 70 lcorrect |
|---|
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Other data
| Linkage category | Cat Icorrect |
|---|
Where this model stands
Power-to-weight ratio: 12.9 kW/t (26 kW / 2 t)
Power class: Compact (< 40 hp)
Stronger than 20% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Deutz-Fahr D 4007 have?
The Deutz-Fahr D 4007 delivers 35 hp.
How much does the Deutz-Fahr D 4007 weigh?
The unladen weight is 1,980 kg.
What engine does the Deutz-Fahr D 4007 have?
3 cylinders, 2,826 cm³ displacement, Diesel.
How fast does the Deutz-Fahr D 4007 go?
Top speed is 25 km/h.
What are the dimensions of the Deutz-Fahr D 4007?
3,470 mm × 1,560 mm × 2,360 mm.
When was the Deutz-Fahr D 4007 built?
Production years: 1980–1987.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 27 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
