Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Deutz › D series › D 40 L (Werksbezeichnung D40.2)

Deutz D 40 L (Werksbezeichnung D40.2)

Built: 1962–1965 · Series: D-Reihe

More machines from model year 1962

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Deutz D 40 L (Werksbezeichnung D40.2) is a model in the D-Reihe series. Production: 1962–1965. The engine delivers 35 hp (25.6 kW), has 3 cylinders, with a displacement of 2,550 cm³. Rated speed is 2,150 rpm. The machine is 3,245 mm long, 1,560 mm wide and 1,630 mm high. The unladen weight is 1,630 kg. The wheelbase measures 1,950 mm. Ground clearance is 420 mm. Top speed is 20 km/h. Transmission: Deutz T35 with 8V/2R. The engine is air-cooled. Tyres: front 5.50-16 ASF, rear 12.4-28 AS. The fuel is diesel. Construction: frameless unit construction. Around 23.361 units were built. The D-Reihe series covers 14 models. Rated output within it ranges from 14 to 52 hp; the D 40 L (Werksbezeichnung D40.2) sits in the middle of that range with 35 hp. Its immediate neighbours are the D 30 S-Plantage below it with 28 hp and the D 40.1 bzw. D40.1S above it with 38 hp. Unladen weight within it ranges from 920 to 2,270 kg; here the D 40 L (Werksbezeichnung D40.2) sits in the middle of that range with 1,630 kg. 189 Deutz models across 25 series are on record.

Deutz D Series – Air-Cooled Compact Tractors of the Early 1960s, 10.2 to 38.1 kW and Operating Weight from 920 to 2,270 kg

The D series covered Deutz's compact tractors of the early 1960s, powered by the brand's characteristic air-cooled diesel engines. According to the register, output of the recorded models ranges from 10.2 to 38.1 kW, with models rated in horsepower spanning 15 to 52 hp, using one- to four-cylinder engines with displacement from 850 to 3,400 cm³.

Read on 3 more paragraphs

Recorded operating weight runs from 920 to 2,270 kg, wheelbase from 1,690 to 2,230 mm, and top speed of the listed models spans 17.7 to 30 km/h. Models such as the D 30 S-Plantage show that narrow-track variants for specialty crops were also offered within the series.

The air-cooled engines were considered robust and low-maintenance, since they needed no coolant or the wear parts that go with it. When buying a used D-series tractor, the engine variant matters most, as cylinder count and displacement differ considerably within the range.

The D series was built from 1959 to 1964, predating the international standardisation of the three-point hitch under ISO 730 in 1977, and in part even predating the power take-off speed of 540 revolutions per minute internationally fixed in 1965 under ISO R 500. Deutz still exists as an engine manufacturer today and continues to supply spare parts for its classic air-cooled units, easing the upkeep of these compact tractors.

Sources: SpecCodex register, model data: Deutz D-Reihe

Technical data

Engine

Fueldieselcorrect
Power35 hp (25.6 kW)correct
Rated speed2,150 rpmcorrect
Cylinders3correct
Displacement2,550 cm³correct
Coolingair-cooledcorrect

Dimensions and weights

Length3,245 mmcorrect
Width1,560 mmcorrect
Height1,630 mmcorrect
Wheelbase1,950 mmcorrect
Ground clearance420 mmcorrect
Unladen weight1,630 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
GearboxDeutz T35 with 8V/2Rcorrect
Front tyres5.50-16 ASFcorrect
Rear tyres12.4-28 AScorrect
Top speed20 km/hcorrect

Origin and approval

Constructionframeless unit constructioncorrect
Units built23,361correct

Where this model stands

Power-to-weight ratio: 15.7 kW/t (26 kW / 1.6 t)

Power class: Compact (< 40 hp)

Stronger than 20% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Deutz D 40 L (Werksbezeichnung D40.2) have?

The Deutz D 40 L (Werksbezeichnung D40.2) delivers 35 hp.

How much does the Deutz D 40 L (Werksbezeichnung D40.2) weigh?

The unladen weight is 1,630 kg.

What engine does the Deutz D 40 L (Werksbezeichnung D40.2) have?

3 cylinders, 2,550 cm³ displacement, Diesel.

How fast does the Deutz D 40 L (Werksbezeichnung D40.2) go?

Top speed is 20 km/h.

What are the dimensions of the Deutz D 40 L (Werksbezeichnung D40.2)?

3,245 mm × 1,560 mm × 1,630 mm.

When was the Deutz D 40 L (Werksbezeichnung D40.2) built?

Production years: 1962–1965.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare