Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Deutz Allis › 6260

Deutz Allis 6260

Built: 1986–1990 · Series: 6.200 er- Serie

More machines from model year 1986

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 6260 from Deutz Allis is part of the 6200er series. Production: 1986–1990. The engine delivers 58 hp (42.7 kW), has 3 cylinders, with a displacement of 3,064 cm³. Torque is 195 Nm. Rated speed is 2,500 rpm. The machine is 3,640 mm long, 2,139 mm wide and 2,480 mm high. The unladen weight is 2,930 kg. The wheelbase measures 2,012 mm. Ground clearance is 457 mm. Top speed is 30 km/h. The tank holds 75 litres. Transmission: 8 V/4 R or 16 V/8 R. The engine is air-cooled. Tyres: front 7.50-16 ASF (4 WD: 11.2-24 AS), rear 16.9 R 30 AS. The fuel is diesel. The bore measures 102.11 mm. The stroke is 124.97 mm. Maximum torque is reached at 1,550 rpm. Construction: unit construction (no separate frame). The linkage is category II. The PTO runs at 540/1000 rpm. The 6.200 er- Serie series covers 6 models. Rated output within it ranges from 45 to 74 hp; the 6260 sits in the middle of that range with 58 hp. Its immediate neighbours are the 6150 below it with 57 hp and the 6265 above it with 66 hp. Unladen weight within it ranges from 2,238 to 3,550 kg; here the 6260 sits in the middle of that range with 2,930 kg. 36 Deutz Allis models across 10 series are on record.

Deutz-Allis 6.200 series (1985–1990) – the Deutz tractors in orange for North America: 6150 to 6275, the last digits as power step, air-cooled Deutz three- and four-cylinders of 2.8 to 4.1 litres, 33 to 54 kW

Deutz-Allis emerged in 1985 when Klöckner-Humboldt-Deutz bought the farm-equipment division of Allis-Chalmers and continued the orange tractors with its own technology – the 6200 series is the mid-range of that period: Deutz-Fahr tractors of the DX range from Cologne, painted orange and sold through the Allis-Chalmers dealer network in North America. The type logic: 6 marks the range, the following digits the power step – 6150 about 45 hp, 6240 about 55, 6250 about 60, 6260 about 65, 6265 and 6275 about 70 to 74 hp – in North America without Deutz's own DX nomenclature. The engines are Deutz's air-cooled three- and four-cylinders of the 912 and 913 series of 2.8 to 4.1 litres at 2,150 to 2,500 rpm – Deutz's hallmark, which was regarded as exotic in North America and divided customers.

Read on 3 more paragraphs

The register lists 6 versions with 32.8 to 54.4 kW from three- and four-cylinders of 2,827 to 4,086 cm³, torque from 166 to 254 Nm, unladen weights from 2,238 to 3,550 kg, lengths from 3,315 to 3,950 mm, widths from 1,643 to 2,139 mm and heights from 2,250 to 2,620 mm.

Deutz-Allis remained an episode: in 1990 KHD sold the division to its management, which founded AGCO from it and continued the brand as AGCO Allis with Cummins engines; the 6200s are the Deutz tractors with the rarest badge.

On used tractors, operating hours, the condition of cooling blower and cylinder fins (overheating when fouled), injection pump, clutch and gearbox, hydraulics and sheet metal count; parts run through Deutz (engine) and AGCO (machine).

Sources: SpecCodex register, model data: Deutz-Allis 6.200er-Serie, Deutz-Allis (Wikipedia)

Technical data

Engine

Fueldieselcorrect
Power58 hp (42.7 kW)correct
Rated speed2,500 rpmcorrect
Torque195 Nmcorrect
Speed at max. torque1,550 rpmcorrect
Cylinders3correct
Displacement3,064 cm³correct
Bore102.11 mmcorrect
Stroke124.97 mmcorrect
Coolingair-cooledcorrect

Dimensions and weights

Length3,640 mmcorrect
Width2,139 mmcorrect
Height2,480 mmcorrect
Wheelbase2,012 mmcorrect
Ground clearance457 mmcorrect
Unladen weight2,930 kgcorrect

Drivetrain and chassis

Driverear- or four-wheel drivecorrect
Gearbox8 V/4 R or 16 V/8 Rcorrect
Front tyres7.50-16 ASF (4 WD: 11.2-24 AS)correct
Rear tyres16.9 R 30 AScorrect
Top speed30 km/hcorrect

Working data

Fuel tank capacity75 lcorrect

Origin and approval

Constructionunit construction (no separate frame)correct

Other data

Linkage categoryCat IIcorrect
PTO speed540/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 14.6 kW/t (43 kW / 2.9 t)

Power class: Universal (40–100 hp)

Stronger than 40% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Deutz Allis 6260 have?

The Deutz Allis 6260 delivers 58 hp.

How much does the Deutz Allis 6260 weigh?

The unladen weight is 2,930 kg.

What engine does the Deutz Allis 6260 have?

3 cylinders, 3,064 cm³ displacement, Diesel.

How fast does the Deutz Allis 6260 go?

Top speed is 30 km/h.

What are the dimensions of the Deutz Allis 6260?

3,640 mm × 2,139 mm × 2,480 mm.

When was the Deutz Allis 6260 built?

Production years: 1986–1990.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 27 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare