Detank RD304
Built: 2014-2015 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Built in 2014-2015, the Detank RD304 is a tractor from Detank. 22 kW is available.
Drive type: MFWD.
It runs on diesel; the engine is water-cooled. The predecessor was the Chery RD304-A, Chery RD304-B, the successor the Zoomlion RD304. Within the range, rated power spans from 19 to 138 kW; with 22 kW, the RD304 sits at the bottom end. Directly alongside are the RD254 with 19 kW below and the Ilgagro Detank RF354 with 26 kW above.
Technical data
Engine
| Engine make | Laidong/Jiang Dongcorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 30 hp (22 kW)correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|
Origin and approval
| Plant | Wuhu, Anhui, Chinacorrect |
|---|---|
| Predecessor | Chery RD304-A, Chery RD304-Bcorrect |
| Successor | Zoomlion RD304correct |
Frequently asked questions
How much power does the Detank RD304 have?
The Detank RD304 delivers 30 hp.
When was the Detank RD304 built?
Production years: 2014-2015.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.