Detank RD354
Built: 2014-2015 · Series: Other models
More machines from model year 2014
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Detank RD354 rolled off the line in 2014-2015 as a tractor. 26 kW is available.
Propulsion comes from MFWD.
It runs on diesel; the engine is water-cooled. It replaced the Chery RD354-A,Chery RD354-B and was in turn replaced by the Zoomlion RD354. Within the range, rated power spans from 19 to 138 kW; with 26 kW, the RD354 sits at the bottom end. Directly alongside are the RF304 with 22 kW below and the RK400 with 30 kW above.
Technical data
Engine
| Engine make | Laidong/Jiang Dongcorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 35 hp (26 kW)correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|
Origin and approval
| Plant | Wuhu, Anhui, Chinacorrect |
|---|
Other data
| Predecessor | Chery RD354-A, Chery RD354-Bcorrect |
|---|---|
| Successor | Zoomlion RD354correct |
Frequently asked questions
How much power does the Detank RD354 have?
The Detank RD354 delivers 35 hp.
When was the Detank RD354 built?
Production years: 2014-2015.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.