Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Demag › Other models › KB5 17

Demag KB5 17

Built: 2017 · Series: Other models

More machines from model year 2017

The photo shows the AC100/10X8 from the same series. Source: https://commons.wikimedia.org/wiki/File:Terex_Demag_AC100_p2

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Demag KB5 17 is a vehicle built by Demag. Production: 2017. The engine delivers 368 kW, has 6 cylinders, with a displacement of 12,742 cm³. The vehicle is 14,600 mm long and 3,000 mm wide. The unladen weight is 68,250 kg. Rated output across the Demag range ranges from 205 to 480 kW; the KB5 17 sits in the middle of that range with 368 kW. Its immediate neighbours are the Terex-Demag AC140C below it with 350 kW and the AC160-2 above it with 390 kW. Unladen weight across the Demag range ranges from 32,650 to 96,000 kg; here the KB5 17 sits in the middle of that range with 68,250 kg. 88 Demag models across 10 series are on record.

Demag – other mobile cranes registered as trucks: the AC (All Terrain Crane) series, lifting capacity in tonnes as the type name, 205 to 448 kW, kerb weight 32,750 to 96,000 kg

Demag was a German crane maker whose mobile-crane division belonged to Mannesmann and later to Terex, before the Japanese group Tadano took it over in 2019; in this register the vehicles appear as trucks because mobile cranes need a standard truck registration to travel on public roads. The AC range stands for "All Terrain Crane", with the attached number giving the maximum lifting capacity in tonnes – the AC 100 thus lifts up to 100 tonnes, the AC 700 up to 700 tonnes. Individual entries come from the Finnish vehicle register, where Demag mobile cranes are listed as "ajoneuvonosturi".

Read on 3 more paragraphs

The register lists 37 versions with six- to eight-cylinder engines from 6,370 to 15,930 cc, outputs from 205 to 448 kW, kerb weights from 32,750 to 96,000 kg and gross vehicle weights from 33,000 to 96,000 kg; width ranges from 2,500 to 3,000 mm.

Mobile cranes such as the AC range are used in high-rise and industrial construction, wind-turbine assembly and heavy-lift transport, where their own drive means they can reach the work site without a low-loader; Demag competed here with Liebherr and Grove.

When buying a used mobile crane, what matters above all is the operating hours on the hoist and telescopic boom, the condition of the hydraulic cylinders and hoses, and wear on the outriggers and axles from the high operating weight; servicing, inspection and spare parts today run through Tadano or specialist crane-service companies.

Sources: SpecCodex register, model data: Demag (weitere Modelle), Zulassungsdaten Traficom (Finnland)

Technical data

Engine

Power368 kWcorrect
Cylinders6correct
Displacement12,742 cm³correct

Dimensions and weights

Length14,600 mmcorrect
Width3,000 mmcorrect
Unladen weight68,250 kgcorrect

Where this model stands

Power-to-weight ratio: 5.4 kW/t (368 kW / 68.2 t)

Stronger than 80% of the trucks in the register — out of 25,241 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Demag KB5 17 have?

The Demag KB5 17 delivers 368 kW.

How much does the Demag KB5 17 weigh?

The unladen weight is 68,250 kg.

What engine does the Demag KB5 17 have?

6 cylinders, 12,742 cm³ displacement.

What are the dimensions of the Demag KB5 17?

14,600 mm × 3,000 mm.

When was the Demag KB5 17 built?

Production years: 2017.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare