De Angelis ABB CONTROL ROOM SYS2
Built: 2024 · Series: ABB
More machines from model year 2024
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
De Angelis ABB – Italian special-purpose semi-trailers for switchgear and transformers: five versions from 8,000 to 26,900 kg, for equipment up to 420 kV, length 10,650 mm, width 2,550 mm
De Angelis is an Italian manufacturer of semi-trailers for heavy and special transport. This page gathers the ABB range, trailers named after the cargo they carry: the CONTROL ROOM SYS2 and SYS3 models carry complete switchgear containers, the M0HPASS and M0PASS types are built for equipment up to 170 kV, and the M0SPASS for equipment up to 420 kV – gas-insulated switchgear and transformer components for high-voltage grids.
Read on 3 more paragraphs
The register lists five versions with unladen weights from 8,000 to 26,900 kg; the gross weight falls within the same span. Length and width stand at 10,650 mm and 2,550 mm respectively.
Trailers of this kind are special-purpose vehicles for the energy sector: they deliver finished switchgear modules and high-voltage components directly to the site of substations and power plants, where a crane or gantry lifts the cargo off. The market for these vehicles is closely tied to the expansion of power grids and renewable energy and is served by a small number of specialised manufacturers.
When buying a used example, what matters most is the condition of the reinforced frame, the hydraulics for lifting axles and load securing, the axles and brakes, and any deformation from the high point loads of the switchgear. As these semi-trailers are built in small numbers for special transport, spare parts usually come directly from the manufacturer or from specialist heavy-haulage workshops.
Sources: SpecCodex register, model data: De Angelis ABB
Technical data
Dimensions and weights
| Wheelbase | 1,130 mmcorrect |
|---|---|
| Unladen weight | 26,100 kgcorrect |
| Gross vehicle weight | 26,100 kgcorrect |
Drivetrain and chassis
| Wheels | 12correct |
|---|---|
| Top speed | 80 km/hcorrect |
Frequently asked questions
How much does the De Angelis ABB CONTROL ROOM SYS2 weigh?
The unladen weight is 26,100 kg.
What is the gross vehicle weight of the De Angelis ABB CONTROL ROOM SYS2?
26,100 kg.
Up to what speed is the De Angelis ABB CONTROL ROOM SYS2 approved?
Approved up to 80 km/h.
When was the De Angelis ABB CONTROL ROOM SYS2 built?
Production years: 2024.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.