Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › DAF › OPRIJ › OPRIJ LF 16-65

DAF OPRIJ LF 16-65

Built: 2014-2020 · Series: OPRIJ

More machines from model year 2014

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The OPRIJ series from DAF includes the OPRIJ LF 16-65. Production: 2014-2020. The engine has 6 cylinders, with a displacement of 6,700 cm³. The vehicle is 9,300 mm long and 2,530 mm wide. The unladen weight is 6,560 kg. The wheelbase measures 5,400 mm. Top speed is 90 km/h. The gross vehicle weight is 15,750 kg. The vehicle runs on 6 wheels. The OPRIJ series covers 53 models. Unladen weight within it ranges from 4,930 to 11,893 kg; the OPRIJ LF 16-65 sits in the lower part of that range with 6,560 kg. Its immediate neighbours are the OPRIJ LF 21-70 D below it with 6,550 kg and the OPRIJ XB 16-77 above it with 6,667 kg. Gross vehicle weight within it ranges from 11,990 to 33,500 kg; here the OPRIJ LF 16-65 sits in the lower part of that range with 15,750 kg. 3352 DAF models across 109 series are on record.

DAF Oprij – the collective page of drive-on ramp bodies on DAF chassis of the CF, LF, XB and XD ranges, 53 versions, 4 to 6 cylinders, 4,460 to 12,902 cm³, gross weights from 11,990 to 33,500 kg

Oprij is Dutch for a drive-on or ramp vehicle and here denotes trucks on DAF chassis fitted with a ramp that cargo can drive onto by itself. The models are listed in the register under DAF and carry the abbreviations of the DAF ranges: LF for the light and medium range, CF for the classic medium and heavy range, and XB and XD as the newer ranges introduced from 2021, gradually replacing LF and CF. The numbers after the range letters give the weight class and engine output, such as LF 16-68 or CF 32-90; the suffixes D, V, K, S and OV denote body or equipment variants.

Read on 3 more paragraphs

The register lists here 53 versions with 4 to 6 cylinders and 4,460 to 12,902 cm³ displacement. Unladen weights lie between 4,930 and 11,893 kg, gross weights between 11,990 and 33,500 kg. Lengths range from 8,210 to 11,300 mm, widths from 2,280 to 2,550 mm.

Vehicles with a drive-on ramp on a DAF chassis are used to carry vehicles and self-propelled machines that drive onto the load bed via the ramp instead of being loaded by crane or tail lift. The span from the light LF range to the heavy CF range shows that this body type was fitted across almost the entire DAF commercial-vehicle programme.

On a used example of these DAF chassis, operating hours and the engine's service record, the condition of brakes and air suspension, corrosion on the frame and on the ramp itself, the function of the ramp's hydraulics or mechanism, and wear on the rollers and guide rails of the load bed all matter. Parts for chassis and engine run through the DAF dealer network, parts for the ramp bodywork through the respective body builders.

Sources: SpecCodex register, model data: DAF Oprij, DAF Trucks (manufacturer), Zulassungsdaten RDW (Niederlande)

Technical data

Engine

Cylinders6correct
Displacement6,700 cm³correct

Dimensions and weights

Length9,300 mmcorrect
Width2,530 mmcorrect
Wheelbase5,400 mmcorrect
Unladen weight6,560 kgcorrect
Gross vehicle weight15,750 kgcorrect

Drivetrain and chassis

Wheels6correct
Top speed90 km/hcorrect

Frequently asked questions

How much does the DAF OPRIJ LF 16-65 weigh?

The unladen weight is 6,560 kg.

What is the gross vehicle weight of the DAF OPRIJ LF 16-65?

15,750 kg.

What engine does the DAF OPRIJ LF 16-65 have?

6 cylinders, 6,700 cm³ displacement.

How fast does the DAF OPRIJ LF 16-65 go?

Top speed is 90 km/h.

What are the dimensions of the DAF OPRIJ LF 16-65?

9,300 mm × 2,530 mm.

When was the DAF OPRIJ LF 16-65 built?

Production years: 2014-2020.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare