Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › DAF › FAT › FAT CF85.510 T 6X4

DAF FAT CF85.510 T 6X4

Built: 2008 · Series: FAT

More machines from model year 2008

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The DAF FAT CF85.510 T 6X4 belongs to the FAT series. Production: 2008. The engine delivers 375 kW, has 6 cylinders, with a displacement of 12,900 cm³. The vehicle is 7,980 mm long and 2,600 mm wide. The unladen weight is 13,200 kg. The gross vehicle weight is 33,000 kg. The gearbox offers 5 gears. The FAT series covers 25 models. Unladen weight within it ranges from 9,351 to 27,800 kg; the FAT CF85.510 T 6X4 sits in the lower part of that range with 13,200 kg. Its immediate neighbours are the FAT WS 32 T below it with 12,440 kg and the FAT WS 32T above it with 13,255 kg. Gross vehicle weight within it ranges from 23,500 to 38,000 kg; here the FAT CF85.510 T 6X4 sits in the upper part of that range with 33,000 kg. 3352 DAF models across 109 series are on record.

DAF FAT – the collective page for heavy DAF trucks with the FAT chassis code, from the 2525 range through the 75 and WS ranges to the XF105: six-cylinder engines of 9.2 to 12.9 litres, gross weights up to 38 tonnes

This page gathers DAF trucks with the factory FAT chassis code. FA denotes a 4x2 chassis in DAF's own type code, with the attached letters R and T marking an additional axle configuration; a few models also carry the axle formula 6X4 explicitly in their name. The model list ranges from the four-digit types of the 2500 and 2600 ranges and the WS range through the 75 and 85 types to the more recent CF and XF105 generation, spanning several decades of DAF's type history in the heavy segment.

Read on 3 more paragraphs

The register lists 25 versions here, all with six-cylinder engines of 9,186 to 12,902 cc displacement, unladen weights from 9,351 to 27,800 kg, gross weights from 23,500 to 38,000 kg, lengths from 6,630 to 10,710 mm and widths from 2,450 to 2,600 mm; for part of the models, outputs of 315 to 375 kW.

Alongside Mercedes-Benz, Scania, Volvo, MAN and Iveco, DAF ranks among the major European heavy-truck makers; the FAT chassis, with its higher gross weights and partly three-axle configuration, covers heavy construction and long-haul transport, where high payload and axle-load distribution matter.

On a used example, the condition of the six-cylinder diesel engines, especially the turbocharger and injection system, the gearbox and clutch, rust on the frame and cab mounts, and the braking system and air suspension all count; on the older 2500 and WS types, spare-parts supply increasingly runs through specialists. For current CF and XF models, the DAF dealer network supplies parts.

Sources: SpecCodex register, model data: DAF FAT, DAF Trucks (PACCAR, Hersteller)

Technical data

Engine

Power375 kWcorrect
Cylinders6correct
Displacement12,900 cm³correct

Dimensions and weights

Length7,980 mmcorrect
Width2,600 mmcorrect
Unladen weight13,200 kgcorrect
Gross vehicle weight33,000 kgcorrect

Drivetrain and chassis

Gears5correct

Where this model stands

Power-to-weight ratio: 28.4 kW/t (375 kW / 13.2 t)

Stronger than 84% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the DAF FAT CF85.510 T 6X4 have?

The DAF FAT CF85.510 T 6X4 delivers 375 kW.

How much does the DAF FAT CF85.510 T 6X4 weigh?

The unladen weight is 13,200 kg.

What is the gross vehicle weight of the DAF FAT CF85.510 T 6X4?

33,000 kg.

What engine does the DAF FAT CF85.510 T 6X4 have?

6 cylinders, 12,900 cm³ displacement.

What are the dimensions of the DAF FAT CF85.510 T 6X4?

7,980 mm × 2,600 mm.

When was the DAF FAT CF85.510 T 6X4 built?

Production years: 2008.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare