CLAAS XERION 5000 TRAC
Series: Xerion
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
CLAAS Xerion – High-Power Tractor With Rotating Cab Since 1997, with Six-Cylinder Engines, 224 to 380 kW and Operating Weight from 10,200 to 16,570 kg
CLAAS launched the Xerion in 1997 as a standalone large-tractor series. Distinctive features include four equal-size wheels, a cab that rotates 180 degrees, and, on the Saddle Trac version, a centrally mounted cab with mounting points at the front, rear and middle of the vehicle. According to the register, engine output ranges from 224 to 380 kW, with models rated in horsepower spanning 305 to 524 hp.
Read on 3 more paragraphs
The six-cylinder engine displaces between 8,801.5 and 12,809 cm³ depending on model, and PTO output of the recorded models ranges from 380 to 472 hp. Recorded operating weight falls between 10,200 and 16,570 kg, wheelbase between 3,300 and 3,600.2 mm, and top speed is around 50 km/h.
Within the CLAAS range, the Xerion sits above the Axion series as a high-power tractor for operations with heavy draft requirements, such as tillage, slurry tanker transport or contracting work. When buying a used Xerion, it matters to distinguish between Standard, Saddle Trac and Trac VC versions.
With rated outputs from 224 to 380 kW, the Xerion exceeds ISO 730 Category III and, in its most powerful models, reaches Category IV for the rear three-point hitch. Both Caterpillar and Mercedes-Benz, whose engines were fitted depending on model year, remain active engine manufacturers and still supply spare parts for their units.
Sources: SpecCodex register, model data: CLAAS Xerion, CLAAS
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
1 current listings for CLAAS XERION 5000 TRAC on Hutnia.com.
View offers on Hutnia.com →
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
XERION 3800 TRAC VC
XERION 4000
XERION 4500
XERION 5000
Xerion
Xerion 3300
Xerion 3300 Saddle Trac
Xerion 3300 TRAC
Xerion 3300 Trac VC
Xerion 3800
Xerion 3800 Saddle Trac
Xerion 3800 TRAC
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
