CLAAS AXION 800
Series: AXION
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
CLAAS Axion – High-Power Tractor Since 2003: Concept, Power Class, CMATIC Option, 122 to 230 kW and Operating Weight from 8,869.5 to 10,119.6 kg
CLAAS launched the Axion in 2003 as a new large-tractor series, built at its own plant in Le Mans acquired along with Renault Agriculture. According to the register, output of the recorded models ranges from 122 to 230 kW, with models rated in horsepower spanning 163 to 205 hp, using six-cylinder engines with displacement from 6,700.7 to 6,789.2 cm³.
Read on 3 more paragraphs
Recorded operating weight runs from 8,869.5 to 10,119.6 kg, and top speed of the listed models is 50.1 km/h. Besides conventional powershift gearboxes, CLAAS also offers stepless CMATIC transmission within the Axion family, identifiable from the corresponding model designations in the register.
Within the CLAAS range, the Axion sits above the Arion series and below the Xerion as a classic large tractor for arable farms with heavy draft requirements. Buyers of a used Axion should check gearbox variant, hydraulic equipment and emissions stage, since the range changed considerably across model years.
With rated outputs from 122 to 230 kW, the Axion falls within ISO 730 Category III for the rear three-point hitch, with a standard dual-speed power take-off at 540 and 1,000 revolutions per minute for heavy implements. The six-cylinder diesel engines are turbocharged and charge-air cooled, as is common throughout tractors of this power class.
Sources: SpecCodex register, model data: CLAAS Axion, CLAAS
Technical data
Origin and approval
| Version | AXION 800 CEBIScorrect |
|---|
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 1 individual figure for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
1 current listings for CLAAS AXION 800 on Hutnia.com.
View offers on Hutnia.com →
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
AXION 8
AXION 810 CIS
AXION 810 CMATIC
AXION 810 CVT
AXION 820 CEBIS
AXION 830 CMATIC
AXION 850 CEBIS
AXION 850 CIS
AXION 870
AXION 870 CMATIC
AXION 960 TT
AXION CEBIS 820
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.