StartTractorsCLAAS › Axion 850

CLAAS Axion 850 4WD

Series: AXION

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the CLAAS Axion 850 belongs to the Claas 4WD Tractor series. Under the bonnet works a six-cylinder engine displacing 6.8 litres, producing 248 hp (175.2 kW). Rated power is reached at 2,200 rpm.

Top speed is 50 km/h. Empty, it weighs 10,120 kg.

Within the range, rated power spans from 74.1 to 517 hp; with 248 hp, the Axion 850 sits in the upper third. Directly alongside are the Axion 840 with 233 hp below and the Axion 860 with 254 hp above.

Technical data

Engine

Engine modelFPT 6.7correct
Power248.4 hp (175.2 kW)correct
Rated speed2,200 rpmcorrect
Cylinders6correct
Displacement6,789.2 cm³correct

Dimensions and weights

Ground clearance564.1correct
Unladen weight10,119.6 kgcorrect

Drivetrain and chassis

Gearbox typeHexashiftcorrect
Forward gears24correct
Reverse gears24correct
Tyre sizeFront 480/70 R 30, Rear 620/70 R42correct
Top speed50.1 km/hcorrect

Working data

Pump flow110.2 l/mincorrect
Hydraulic oil capacity151.4 lcorrect
Hydraulic pressure200correct
Fuel tank capacity454.2 lcorrect

Other data

Height3,203.4correct

Where this model stands

Power-to-weight ratio: 17.3 kW/t (175 kW / 10.1 t)

Power class: Heavy (> 180 hp)

Stronger than 95% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the CLAAS Axion 850 have?

The CLAAS Axion 850 delivers 248 hp.

How much does the CLAAS Axion 850 weigh?

The unladen weight is 10,120 kg.

What engine does the CLAAS Axion 850 have?

6 cylinders, 6,789 cm³ displacement.

How fast does the CLAAS Axion 850 go?

Top speed is 50.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare