CLAAS Arion 610 (88 kW)
Built: 2007–2013 · Series: Arion 600
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Claas Arion 600 (from 2007) – the mid-range six-cylinder from Le Mans: Arion 610 to 650, the number as power step, Hexashift and Cmatic as transmissions, DPS six-cylinder of 6.8 litres, 88 to 135 kW, 5.7 to 6.8 t
The Arion 600 is Claas's mid-range six-cylinder of 120 to 185 hp – introduced in 2007 as successor to the Ares 600 and built at the Le Mans plant, the former Renault tractor works that Claas took over in 2003. The type logic: Arion marks the mid-range (Axion the high-horsepower tractors, Nexos and Elios the small ranges), 600 the six-cylinder range (500 the four-cylinders), the last digit the power step – 610 about 120 hp to 650 about 185 hp – the suffixes Cis, Cebis and Cmatic the control and transmission version: Hexashift is the semi-powershift with six powershift steps, Cmatic the stepless transmission. The engine is the Deere Power Systems six-cylinder from Saran of 6.8 litres at 2,200 rpm, with common-rail injection and power boost; the front-axle and cab suspension and the Cebis control system come from the Axion.
Read on 3 more paragraphs
The register lists 5 versions with 88 to 135 kW (120 to 184 hp) from the six-cylinder of 6,788 cm³, unladen weights from 5,720 to 6,820 kg, gross weights from 10,250 to 12,000 kg, lengths from 4,818 to 5,155 mm, widths from 2,460 to 3,055 mm and heights from 2,960 to 3,007 mm.
The Arion 600 is the tractor of mixed and forage farms in France, Germany and Britain that competes with the John Deere 6M, Fendt 500 and Massey Ferguson 6600; Claas has continued it since with emission stages IIIB to V and new control concepts.
On used tractors, operating hours, engine and exhaust aftertreatment, Hexashift clutches or Cmatic oil history, front-axle suspension, hydraulics and electronics, cab and front loader count; parts run through the Claas dealer network.
Sources: SpecCodex register, model data: CLAAS Arion 600, CLAAS (Hersteller, Le Mans)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 120 hp (88 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 6,788 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 5,155 mmcorrect |
|---|---|
| Width | 3,000 mmcorrect |
| Height | 2,985 mmcorrect |
| Wheelbase | 2,820 mmcorrect |
| Ground clearance | 488 mmcorrect |
| Unladen weight | 5,720 kgcorrect |
| Gross vehicle weight | 10,250 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Front tyres | 14.9 R 28correct |
| Rear tyres | 18.4 R 38correct |
| Top speed | 40 km/hcorrect |
Origin and approval
| Version | ARION 610 (A76)correct |
|---|
Where this model stands
Power-to-weight ratio: 15.4 kW/t (88 kW / 5.7 t)
Power class: Large (100–180 hp)
Stronger than 74% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the CLAAS Arion 610 have?
The CLAAS Arion 610 delivers 120 hp.
How much does the CLAAS Arion 610 weigh?
The unladen weight is 5,720 kg.
What is the gross vehicle weight of the CLAAS Arion 610?
10,250 kg.
What engine does the CLAAS Arion 610 have?
6 cylinders, 6,788 cm³ displacement, Diesel.
How fast does the CLAAS Arion 610 go?
Top speed is 40 km/h.
What are the dimensions of the CLAAS Arion 610?
5,155 mm × 3,000 mm × 2,985 mm.
When was the CLAAS Arion 610 built?
Production years: 2007–2013.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 22 individual figures for this model. They come from 4 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.