Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Chamberlain › Champion 236

Chamberlain Champion 236

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Champion 236 comes from Chamberlain. The engine delivers 64 hp (48 kW). The engine is water-cooled. The model was built in Australia. The fuel is diesel. Rated output across the Chamberlain range ranges from 45 to 154 hp; the Champion 236 sits in the lower part of that range with 64 hp. Its immediate neighbours are the Champion 9G below it with 45 hp and the Champion 306 above it with 70 hp. Rated output across the Chamberlain range ranges from 34 to 115 kW; here the Champion 236 sits in the lower part of that range with 48 kW. 18 Chamberlain models are on record.

Chamberlain – other models: collective page of Australian tractors from Welshpool, Champion and DA ranges: 34 to 115 kW (45 to 154 hp), Perkins, Detroit Diesel and John Deere engines

This page gathers the models of the Australian maker Chamberlain that the register could not assign to a range of its own, from the early Champion types to the 4080 to 4690 ranges and the Super 70/90. Chamberlain was founded in Welshpool near Perth and built tractors there for Australian farming from the 1950s, before the company passed majority control to John Deere in 1970 and was later fully absorbed by it. The DA and KA suffixes and the Champion names denote different model generations of the brand.

Read on 3 more paragraphs

The register lists here 18 versions with 34 to 115 kW (45 to 154 hp) from two- and three-cylinder engines; Perkins, Detroit Diesel and John Deere are recorded as engine suppliers. Among the fuel types diesel clearly predominates, one model also ran on petrol/TVO (Tractor Vaporising Oil), a light fuel common in Australia and Britain on earlier model years.

In the 1950s and 1960s Chamberlain was one of the few significant Australian tractor makers, supplying chiefly the large grain-growing farms of Western Australia's wheatbelt, where rugged technology and local parts availability mattered more than an international brand presence. The takeover by John Deere ended the brand's independent history, though the Champion models remained in the range for a long time as Chamberlain-John Deere tractors.

Buying used Chamberlain models, the older petrol/TVO types call for checking the carburettor and ignition system, the diesel models the cooling system and injection pump of the respective engine brand, plus wear on the gearbox and rear axle after decades of service. Parts run, depending on the engine, through the Perkins, Detroit Diesel or John Deere networks and through Australian vintage-tractor specialists.

Sources: SpecCodex register, model data: Chamberlain (weitere Modelle)

Technical data

Engine

Fueldieselcorrect
Power64 hp (48 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driverear-wheel driveWDcorrect

Origin and approval

PlantAustraliacorrect

Frequently asked questions

How much power does the Chamberlain Champion 236 have?

The Chamberlain Champion 236 delivers 64 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare