Chamberlain Champion 306
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Chamberlain Champion 306 is a tractor made by Chamberlain. Engine output is 52 kW.
It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 34 to 115 kW; with 52 kW, the Champion 306 sits in the lower third. Directly alongside are the Champion 236 with 48 kW below and the Super 70 with 63 kW above.
Technical data
Engine
| Engine make | Perkinscorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 70 hp (52 kW)correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|
Origin and approval
| Plant | Australiacorrect |
|---|
Frequently asked questions
How much power does the Chamberlain Champion 306 have?
The Chamberlain Champion 306 delivers 70 hp.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.