StartTractorsChallenger › MT295B

Challenger MT295B 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the Challenger MT295B belongs to the Challenger 4WD Tractor series. Under the bonnet works a four-cylinder engine displacing 2.9 litres, producing 53 hp (38.9 kW). Rated power arrives at 2,600 rpm — the engine pulls from low down rather than needing to be revved.

It will not go faster than 28 km/h — a working pace, not a travelling one. Unladen, it tips the scales at 1,690 kg.

Within the range, rated power spans from 22.8 to 593 hp; with 52.8 hp, the MT295B sits in the lower third. Directly alongside are the MT285B with 48.2 hp below and the MT297 with 56.1 hp above.

Technical data

Engine

Power52.8 hp (38.9 kW)correct
Rated speed2,600 rpmcorrect
Cylinders4correct
Displacement2,949.7 cm³correct
AspirationNaturalcorrect

Dimensions and weights

Ground clearance375.2correct
Unladen weight1,690.1 kgcorrect

Drivetrain and chassis

Gearbox typeSynchroshuttlecorrect
Forward gears8correct
Reverse gears8correct
Tyre size(F)9.5-16 6ply; (R)16.9-24 6plycorrect
Top speed28.5 km/hcorrect

Working data

Pump flow61.3 l/mincorrect
Hydraulic pressure156.9correct
Fuel tank capacity50 lcorrect

Other data

Height2,292.1correct

Where this model stands

Power-to-weight ratio: 23 kW/t (39 kW / 1.7 t)

Power class: Universal (40–100 hp)

Stronger than 38% of the tractors in the register — out of 15,240 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Challenger MT295B have?

The Challenger MT295B delivers 52.8 hp.

How much does the Challenger MT295B weigh?

The unladen weight is 1,690 kg.

What engine does the Challenger MT295B have?

4 cylinders, 2,950 cm³ displacement.

How fast does the Challenger MT295B go?

Top speed is 28.5 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare