Challenger MT285B 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the Challenger MT285B belongs to the Challenger 4WD Tractor series. 48 hp (35.4 kW) is what the four-cylinder engine gets out of 2.2 litres. Rated output is reached at 2,600 rpm, so it works in the lower rev range.
Top speed is 29 km/h. Unladen weight is 1,660 kg.
Within the range, rated power spans from 22.8 to 593 hp; with 48.2 hp, the MT285B sits in the lower third. Directly alongside are the MT295 with 44.8 hp below and the MT295B with 52.8 hp above.
Technical data
Engine
| Power | 48.2 hp (35.4 kW)correct |
|---|---|
| Rated speed | 2,600 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 2,197.5 cm³correct |
| Aspiration | Naturalcorrect |
Dimensions and weights
| Ground clearance | 375.2correct |
|---|---|
| Unladen weight | 1,660.1 kgcorrect |
Drivetrain and chassis
| Gearbox type | Synchroshuttlecorrect |
|---|---|
| Forward gears | 8correct |
| Reverse gears | 8correct |
| Tyre size | (F)9.5-16 6ply; (R)16.9-24 6plycorrect |
| Top speed | 29.1 km/hcorrect |
Working data
| Pump flow | 56.4 l/mincorrect |
|---|---|
| Hydraulic pressure | 156.9correct |
| Fuel tank capacity | 50 lcorrect |
Other data
| Height | 2,292.1correct |
|---|
Where this model stands
Power-to-weight ratio: 21.3 kW/t (35 kW / 1.7 t)
Power class: Universal (40–100 hp)
Stronger than 34% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Challenger MT285B have?
The Challenger MT285B delivers 48.2 hp.
How much does the Challenger MT285B weigh?
The unladen weight is 1,660 kg.
What engine does the Challenger MT285B have?
4 cylinders, 2,198 cm³ displacement.
How fast does the Challenger MT285B go?
Top speed is 29.1 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.