Case 22-40
Built: 1919-1924 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Fuel | petrolcorrect |
|---|---|
| Rated speed | 850/mincorrect |
| Cylinders | 4 Hubraumcorrect |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|
Origin and approval
| Plant | USAcorrect |
|---|---|
| Successor | Case 25-45correct |
Other data
| Antrieb antriebstyp | Heckantriebcorrect |
|---|---|
| Bauweise | Gussrahmen-Bauweisecorrect |
| Breite | 2.096 mmcorrect |
| Eigengewicht | 4.173 kgcorrect |
| Getriebe | 2 V/correct |
| Höchstgeschwindigkeit | 5, 15 km/hcorrect |
| Höhe | 2.286 mmcorrect |
| J.i. case modellreihe | Crossmotor-Baureihecorrect |
| Kerosin kühlsystem | Wasserkühlungcorrect |
| Lenkbremse | 6.172 mmcorrect |
| Länge | 3.886 mmcorrect |
| Motor nennleistung | 29, 9 kWcorrect |
| Produktionszeitraum | 1,919correct |
| Radstand | 2.438 mmcorrect |
| Spurweite | Wenderadiuscorrect |
| Stückzahl | 1.850 Maßecorrect |
Frequently asked questions
When was the Case 22-40 built?
Production years: 1919-1924.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 25 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.