Case 1031
Built: 1960-1967 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine make | Casecorrect |
|---|---|
| Fuel | dieselcorrect |
| Fuel | dieselcorrect |
| Rated speed | 2.000/mincorrect |
| Cylinders | 6 Hubraumcorrect |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWDcorrect |
|---|
Origin and approval
| Plant | Racine, Wisconsin, USAcorrect |
|---|
Other data
| Antrieb antriebstyp | rear-wheel drivecorrect |
|---|---|
| Asf hinten | 23.1correct |
| Baureihe modell | 1031 Bauweisecorrect |
| Bodenfreiheit | 406 mmcorrect |
| Breite | 2.235 mmcorrect |
| Getriebe | 8 V/correct |
| Höchstgeschwindigkeit | 25 km/hcorrect |
| Höhe | 1.829 mmcorrect |
| J.i. case modellreihe | 30 ercorrect |
| Kühlsystem | water-cooledcorrect |
| Länge | 4.191 mmcorrect |
| Maße eigengewicht | 4.234 kgcorrect |
| Motor nennleistung | 76, 1 kWcorrect |
| Produktionszeitraum | 1,966correct |
| Radstand | 2.767 mmcorrect |
| Stückzahl | 13,763correct |
| Wenderadius mit lenkbremse | 3.429 mmcorrect |
| Wenderadius ohne lenkbremse | 4.064 mmcorrect |
Frequently asked questions
When was the Case 1031 built?
Production years: 1960-1967.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 28 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.