Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Case IH › MAGNUM › MAGNUM PRO 7210-4

Case IH MAGNUM PRO 7210-4

Built: 1997 · Series: MAGNUM

More machines from model year 1997

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case IH MAGNUM PRO 7210-4 belongs to the MAGNUM series. Production: 1997. The engine delivers 114 kW, with a displacement of 8,277 cm³. The machine is 5,300 mm long and 2,600 mm wide. The unladen weight is 8,500 kg. The gross vehicle weight is 11,570 kg. The MAGNUM series covers 97 models. Rated output within it ranges from 110 to 296 kW; the MAGNUM PRO 7210-4 sits at the bottom of that range with 114 kW. Its immediate neighbours are the Magnum 180 below it with 110 kW and the 7210 PRO/8910 above it with 125 kW. Unladen weight within it ranges from 7,525 to 14,741.8 kg; here the MAGNUM PRO 7210-4 sits at the bottom of that range with 8,500 kg. 1222 Case IH models across 76 series are on record.

Case IH Magnum 7100 and 7200 — the big six, built 1988 to 1999, 110 to 296 kW and Operating Weight from 7,525 to 13,426.3 kg

The Magnum was presented in 1987 as successor to the International 50 in the standard tractor role; series production began in 1988. The first range carried the numbers 7110, 7120, 7130 and 7140 — four large tractors, later joined by a fifth model.

Read on 4 more paragraphs

What they share is the engine: a turbocharged six-cylinder of 8.3 litres. Rated power across the range ran from 155 to 230 hp, with peak output reaching up to 246 or 264 hp at the top. The rising number therefore maps the power step, not the machine size — all models share the same base tractor.

In 1997 the 7100 range became the 7200, again with five models, the 7250 closing it at the top. The Pro designation marks the revised version. Later came the MX Magnum range, with which Case IH carried the visually ageing concept forward.

For the used market this means a 7120 and a 7220 are closely related but roughly a decade apart. Comparing two offers, do not look at the number alone but at year and version — the figure describes a position in the range, not the age of the machine.

With rated outputs of up to 296 kW, the most powerful Magnum models reached ISO 730 Category IV for the rear three-point hitch, while the smaller versions stayed within Category III; a standard dual-speed power take-off at 540 and 1,000 revolutions per minute served heavy tillage implements.

Sources: SpecCodex register, model data: Case IH Magnum 7100/7200, Case IH

Technical data

Engine

Power114 kWcorrect
Displacement8,277 cm³correct

Dimensions and weights

Length5,300 mmcorrect
Width2,600 mmcorrect
Unladen weight8,500 kgcorrect
Gross vehicle weight11,570 kgcorrect

Where this model stands

Power-to-weight ratio: 13.4 kW/t (114 kW / 8.5 t)

Power class: Large (100–180 hp)

Stronger than 84% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case IH MAGNUM PRO 7210-4 have?

The Case IH MAGNUM PRO 7210-4 delivers 114 kW.

How much does the Case IH MAGNUM PRO 7210-4 weigh?

The unladen weight is 8,500 kg.

What is the gross vehicle weight of the Case IH MAGNUM PRO 7210-4?

11,570 kg.

What engine does the Case IH MAGNUM PRO 7210-4 have?

8,277 cm³ displacement.

What are the dimensions of the Case IH MAGNUM PRO 7210-4?

5,300 mm × 2,600 mm.

When was the Case IH MAGNUM PRO 7210-4 built?

Production years: 1997.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare