Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Case IH › CVX › CVX 1195

Case IH CVX 1195 – specifications

Series: CVX​‍​‌‌‍​‍⁠⁠⁠⁠⁠⁠​​‍​‍‌

Build year not documented · Data origin: Official register · sources

The photo shows the CVX 1135 from the same series. Source: technikboerse.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case IH (cnh) CVX 1195 is a tractor made by Case IH (cnh).

Case IH CVX – Early Stepless Series, 2000 to 2011, with Six-Cylinder Engines, 88.3 to 160 kW and Operating Weight from 6,270 to 7,520 kg

From 2000, Case IH used the CVX suffix to denote tractors with stepless transmission, before the technology was folded into the Puma series from 2007; the register lists models up to 2011. Engine output ranges from 88.3 to 160 kW, with models rated in horsepower spanning 120 to 210 hp, using six-cylinder engines with displacement from 6,590 to 6,600 cm³.

Read on 3 more paragraphs

Recorded operating weight runs from 6,270 to 7,520 kg, wheelbase from 2,806 to 2,832 mm, and top speed of the listed models spans 40 to 50 km/h.

The CVX series marked Case IH's entry into stepless transmission technology in the mid-to-upper power segment. For a used CVX model, distinguishing it from the later Puma CVX generation matters, since electronics and operating concept advanced considerably between generations.

With rated outputs from 88.3 to 160 kW, the CVX series falls within ISO 730 Category II to III for the rear three-point hitch, with a standard dual-speed power take-off at 540 and 1,000 revolutions per minute for heavy implements. Case IH remains part of the CNH Industrial group today, so spare parts for the engine, gearbox and hydraulics of this series run through the existing Case IH parts network, including electronic components for the stepless transmission, though older control units can be harder to source than mechanical parts.

Sources: SpecCodex register, model data: Case IH CVX, Case IH

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Latvian open data portal (retrieved August 2026) · Data sources and cross-checks

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare