Case IH MAXXUM 145 MULTICONTROLLER (2015-2017) 4WD
Series: Maxxum
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Case IH Maxxum – One Name for Two Tractor Generations Since 1989
Case IH first used the Maxxum name in 1989 for its 5100 series, then revived it in 2007 for a second generation positioned as a mid-range model below the Puma line. These two eras explain the wide spread of the register data: four- and six-cylinder engines with displacement from 3,920 to 7,480 cm³, output from 66 to 170 kW, and PTO ratings from 90 to 120 hp among the recorded models.
Read on 2 more paragraphs
Recorded operating weight ranges from 4,573.6 to 7,980 kg, wheelbase from 2,345 to 2,664 mm, and hydraulic lift capacity from 3,406 to 7,864 kg. Top speed spans from 25 km/h on older mechanical versions to 50 km/h on newer CVX-equipped variants.
For buyers, identifying the generation matters most: the 1990s 5100 series is a fundamentally different tractor from the Maxxum built since 2007, which in the current line-up sits above the Farmall range and below the Puma.
Sources: Kennwerte der Modelle Case IH Maxxum
Technical data
Engine
| Engine make | Case IH FPTcorrect |
|---|---|
| Engine model | Maxxum 145 MultiController (2015-2017)correct |
| Cylinders | 4correct |
| Displacement | 4,501.5 cm³correct |
| Aspiration | Turbocharged with air-to-air intercoolercorrect |
Dimensions and weights
| Width | 2,489.2correct |
|---|
Drivetrain and chassis
| Gearbox type | Semi-powershift transmissioncorrect |
|---|---|
| Forward gears | 16correct |
| Reverse gears | 16correct |
Working data
| Lifting capacity | 3,040 kgcorrect |
|---|
Other data
| Cab height | 2,150.1correct |
|---|
Frequently asked questions
What engine does the Case IH MAXXUM 145 MULTICONTROLLER (2015-2017) have?
4 cylinders, 4,502 cm³ displacement.
How much does the rear linkage of the Case IH MAXXUM 145 MULTICONTROLLER (2015-2017) lift?
The rear linkage lifts 3,040 kg.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
135
5120 MAXXUM
5130 MAXXUM
5140 MAXXUM
5150 MAXXUM
MAXXUM 110
MAXXUM 110 (2012-2014)
MAXXUM 110 4WD
MAXXUM 110 CVT (2013-2014)
MAXXUM 110 LIMITED (2007-2011)
MAXXUM 110 MULTICONTROLLER (2012-2014)
MAXXUM 110 PRO (2007-2011)
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.