Case IH Farmall 105U (3100 kg)
Built: Year not documented · Series: Farmall U
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Case IH Farmall U – utility tractors from Turkey and Basildon: four-cylinder FPT engines, 52 to 88 kW, Farmall 85U to 120U models, a revived heritage name
The Case IH Farmall U is a utility range that Case IH built at its Turkish plant and at its Basildon works in the UK. The Farmall name revives the historic International Harvester tractor brand, while the U in the designation stands for Utility. The register covers the Farmall 85U, 95U, 105U and 120U models, whose number indicates the approximate horsepower class; they are powered by four-cylinder FPT diesel engines.
Read on 3 more paragraphs
The register holds 4 versions rated at 52 to 88 kW (70 to 120 hp), with four-cylinder engines of 3,400 to 4,500 cm³. Weights range from 2,900 to 4,550 kg, with a gross vehicle weight of up to 7,400 kg. Lift capacity falls between 2,606 and 3,667 kg, and cab heights between 2,604 and 2,718 mm. Engine speed is 2,300 rpm, running on diesel.
As utility tractors, the Farmall U models filled the middle power segment between compact yard tractors and large all-round tractors, aimed at mixed farms with field, haulage and front-loader work. By reviving the Farmall name, Case IH deliberately drew on the heritage of International Harvester.
When buying used, check the FPT engine and its injection system, the clutch and gearbox, and the front hydraulics if a front loader was fitted. Typical checkpoints are rust on the mudguards, steps and cab frame, and the condition of the cab seals; spare parts are readily available through the Case IH dealer network.
Sources: SpecCodex register, model data: Case IH Farmall U, Case IH
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 90 hp (67 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,500 cm³correct |
Dimensions and weights
| Height | 2,604 mm (with cab)correct |
|---|---|
| Wheelbase | 2,314 mmcorrect |
| Unladen weight | 3,100 kgcorrect |
Working data
| Fuel tank capacity | 127 lcorrect |
|---|
Where this model stands
Power-to-weight ratio: 21.6 kW/t (67 kW / 3.1 t)
Power class: Universal (40–100 hp)
Stronger than 61% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Case IH Farmall 105U have?
The Case IH Farmall 105U delivers 90 hp.
How much does the Case IH Farmall 105U weigh?
The unladen weight is 3,100 kg.
What engine does the Case IH Farmall 105U have?
4 cylinders, 4,500 cm³ displacement, Diesel.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.