Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Case IH › CS-94

Case IH CS-94

Built: 1995–2003 · Series: CS-Baureihe

More machines from model year 1995

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CS series from Case IH includes the CS-94. Production: 1995–2003. The engine delivers 94 hp (69.1 kW), has 4 cylinders, with a displacement of 4,156 cm³. The engine comes from Valmet Diesel; MWM. Torque is 358 Nm. Rated speed is 2,300 rpm. The machine is 4,210 mm long, 2,200 mm wide and 2,550 mm high. The unladen weight is 3,905 kg. The wheelbase measures 2,477 mm. Ground clearance is 450 mm. Top speed is 30 km/h. The tank holds 100 litres. Transmission: 16 V/8 R, 16 V/16 R and 32 V/16 R. The engine is water-cooled. Tyres: front 420/70 R 24 AS, rear 520/70 R 34 AS. The model was built in St. Valentin, Austria. The fuel is Diesel/RME. The bore measures 105 mm. The stroke is 120 mm. The engine fitted is the 420,83, WD 401,85 (MWM). Construction: unit construction (no separate frame). The linkage is category II. The PTO runs at 430/540/ 750/1000 rpm. The CS-Baureihe series covers 12 models. Rated output within it ranges from 48 to 145 hp; the CS-94 sits in the middle of that range with 94 hp. Its immediate neighbours are the CS-86 (A) below it with 86 hp and the CS 110 above it with 105 hp. Unladen weight within it ranges from 2,360 to 6,205 kg; here the CS-94 sits in the middle of that range with 3,905 kg. 1222 Case IH models across 76 series are on record.

Case IH CS series (1997–2005) – Steyr in red from St. Valentin: CS 48 to CS 94, CS 110 to CS 150, A for four-wheel drive, Sisu and Perkins engines, RME-capable, 35 to 107 kW

The CS series is the result of a purchase: in 1996 Case IH took over the Austrian tractor maker Steyr in St. Valentin, and from 1997 its 9000-series models ran in Case IH red as CS – the small and medium CS 48 to CS 94 from Steyr's compact line, the CS 110 to CS 150 from the big Steyr range. The number roughly gives the output in hp, A four-wheel drive; the engines come from Steyr's suppliers – Sisu and Valmet from Finland for the six-cylinders, Perkins and MWM for the smaller ones – and eight of the twelve register models are approved for rapeseed methyl ester (RME), a Steyr legacy from the 1990s when Austria promoted the biofuel. In 2005 Case IH replaced the CS with the Maxxum and Puma, which are still built in St. Valentin.

Read on 3 more paragraphs

The register lists 12 versions with 35.3 to 106.6 kW (52 to 150 hp), 2,701 to 6,596 cm³ with three to six cylinders, torque from 193 to 556 Nm, unladen weights from 2,360 to 6,205 kg, lengths from 3,530 to 5,435 mm, widths from 1,873 to 2,520 mm and heights from 2,230 to 2,920 mm – all diesel.

The CS are regarded as Austrian quality under the Case badge: Steyr's shuttle transmission, the low cab for mountain farms and the powershift steps made them popular in the Alpine countries and southern Germany; their sisters continued in parallel as the Steyr 9000.

On used tractors, operating hours, engine condition, transmission and powershift, hydraulics and front axle and the cab electrics count; parts run through Case IH and Steyr alike.

Sources: SpecCodex register, model data: Case IH CS, Steyr (CNH, Herkunft der CS-Baureihe)

Technical data

Engine

Engine makeValmet Diesel; MWMcorrect
Engine model420.83; WD 401.85 (MWM)correct
FuelDiesel/RMEcorrect
Power94 hp (69.1 kW)correct
Rated speed2,300 rpmcorrect
Torque358 Nmcorrect
Cylinders4correct
Displacement4,156 cm³ (268.3 cu in ; 253.6 cu in (MWM))correct
Bore105 mmcorrect
Bore4.25 in; 4.13 in (MWM)correct
Stroke120 mmcorrect
Stroke4.72 in; 4.72 in (MWM)correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,210 mmcorrect
Width2,200 mmcorrect
Height2,550 mmcorrect
Wheelbase2,477 mm (97.6 in)correct
Ground clearance450 mmcorrect
Unladen weight3,905 kg (8,600 lbs)correct

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox16 V/8 R, 16 V/16 R and 32 V/16 Rcorrect
Front tyres420/70 R 24 AScorrect
Rear tyres520/70 R 34 AScorrect
Top speed30 km/hcorrect

Working data

Lifting capacity10,804.5correct
Fuel tank capacity100 l (39.6 gal)correct

Origin and approval

PlantSt. Valentin, Austriacorrect
Constructionunit construction (no separate frame)correct

Other data

Linkage categoryCat IIcorrect
PTO speed430/540/ 750/1000correct

Where this model stands

Power-to-weight ratio: 17.7 kW/t (69 kW / 3.9 t)

Power class: Universal (40–100 hp)

Stronger than 63% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case IH CS-94 have?

The Case IH CS-94 delivers 94 hp.

How much does the Case IH CS-94 weigh?

The unladen weight is 3,905 kg.

What engine does the Case IH CS-94 have?

4 cylinders, 4,156 cm³ displacement, Diesel/RME.

How fast does the Case IH CS-94 go?

Top speed is 30 km/h.

What are the dimensions of the Case IH CS-94?

4,210 mm × 2,200 mm × 2,550 mm.

When was the Case IH CS-94 built?

Production years: 1995–2003.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 38 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare