Case IH CS-86 (A)
Built: 1995–2003 · Series: CS-Baureihe
More machines from model year 1995
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Case IH CS series (1997–2005) – Steyr in red from St. Valentin: CS 48 to CS 94, CS 110 to CS 150, A for four-wheel drive, Sisu and Perkins engines, RME-capable, 35 to 107 kW
The CS series is the result of a purchase: in 1996 Case IH took over the Austrian tractor maker Steyr in St. Valentin, and from 1997 its 9000-series models ran in Case IH red as CS – the small and medium CS 48 to CS 94 from Steyr's compact line, the CS 110 to CS 150 from the big Steyr range. The number roughly gives the output in hp, A four-wheel drive; the engines come from Steyr's suppliers – Sisu and Valmet from Finland for the six-cylinders, Perkins and MWM for the smaller ones – and eight of the twelve register models are approved for rapeseed methyl ester (RME), a Steyr legacy from the 1990s when Austria promoted the biofuel. In 2005 Case IH replaced the CS with the Maxxum and Puma, which are still built in St. Valentin.
Read on 3 more paragraphs
The register lists 12 versions with 35.3 to 106.6 kW (52 to 150 hp), 2,701 to 6,596 cm³ with three to six cylinders, torque from 193 to 556 Nm, unladen weights from 2,360 to 6,205 kg, lengths from 3,530 to 5,435 mm, widths from 1,873 to 2,520 mm and heights from 2,230 to 2,920 mm – all diesel.
The CS are regarded as Austrian quality under the Case badge: Steyr's shuttle transmission, the low cab for mountain farms and the powershift steps made them popular in the Alpine countries and southern Germany; their sisters continued in parallel as the Steyr 9000.
On used tractors, operating hours, engine condition, transmission and powershift, hydraulics and front axle and the cab electrics count; parts run through Case IH and Steyr alike.
Sources: SpecCodex register, model data: Case IH CS, Steyr (CNH, Herkunft der CS-Baureihe)
Technical data
Engine
| Fuel | Diesel/RMEcorrect |
|---|---|
| Power | 86 hp (63.3 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,156 cm³correct |
| Bore | 105 mmcorrect |
| Stroke | 120 mmcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,025 mmcorrect |
|---|---|
| Width | 2,063 mmcorrect |
| Height | 2,660 mmcorrect |
| Wheelbase | 2,420 mmcorrect |
| Ground clearance | (A: 440) mmcorrect |
| Unladen weight | 3,530 kgcorrect |
Drivetrain and chassis
| Drive | rear- or four-wheel drivecorrect |
|---|---|
| Gearbox | 16 V/8 R, 16 V/16 R and 32 V/16 Rcorrect |
| Front tyres | 11.00-16 ASF (A: 14.9 R 24 AS)correct |
| Rear tyres | 18.4.34 AScorrect |
| Top speed | 30 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 17.9 kW/t (63 kW / 3.5 t)
Power class: Universal (40–100 hp)
Stronger than 59% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Case IH CS-86 (A) have?
The Case IH CS-86 (A) delivers 86 hp.
How much does the Case IH CS-86 (A) weigh?
The unladen weight is 3,530 kg.
What engine does the Case IH CS-86 (A) have?
4 cylinders, 4,156 cm³ displacement, Diesel/RME.
How fast does the Case IH CS-86 (A) go?
Top speed is 30 km/h.
What are the dimensions of the Case IH CS-86 (A)?
4,025 mm × 2,063 mm × 2,660 mm.
When was the Case IH CS-86 (A) built?
Production years: 1995–2003.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.